[JtParticipant]

Thank you all for the input and feedback.

At the moment we probably have 18 free channels or so given we are running stereo Keys, Pad, 2 Electric GTRs. So just those alone are taking up 8 inputs right there.

Unless I’m missing something on running stereo instruments or making them stereo at the board without having to take up 2 input channels?

What it looks like currently is as follows, though I’m not in front of the board so it’s not completely accurate as we have some additional miscellaneous channels used:

1 Over Ear Mic
2 House Mic
3 House Mic
4 Leader Mic
5 Vox 1
6 Vox 2
7 Vox 3
8/9 GTR 1
10/11 GTR 2
12/13 Keys
14/15 Pad
16 Acoustic GTR 1
17 Acoustic GTR 2 (not always used)
18 Bass
19 Kick Out
20 Kick In
21 Snare Top
22 Snare Bottom
23 Tom 1
24 Tom 2
25 OH L
26 OH R
27 Crowd L
28 Crowd R
29 Snare Trigger
30/31 YouTube Media
32/33 Pro Presenter Media

[JtParticipant]

Much appreciated. Thank you!

[JtParticipant]

Can you further explain how to split a channel so, that one would be for FOH and another for say like IEMs?

[JtParticipant]

Any chance you could further explain possibly step by step how to split a channel? Not sure where to find that at on the board.

Much appreciated

[JtParticipant]

Could any future explain how to properly set up virtual soundcheck?

We are only getting the stereo out of logic or reaper coming into channles 1 and 2 on the board.

We feel we have everything patched in correctly but we maybe just missing a simple step or 2.

Thansk

[JtParticipant]

Also does anyone know of any alternative in ear mixing apps, given it seems one mix won’t have much further development or support?

Thanks

[JtParticipant]

Much appreciated! We will look into this. Thanks

[JtParticipant]

So with record send, I’m finding that in Logic I have really no control of the input.

If I put a gain Plugin on the channel, and add or reduce the gain nothing changes, am I missing something?

[JtParticipant]

As far as I am aware you are correct. Still waiting.

[JtParticipant]

Thank you for your reply. The M1 Mac Mini works fine for us, it’s the Intel one that is giving us issues.

I will try a different method of passing through the signal and see if that works.

Thanks again.

[JtParticipant]

There are other log files I could add if needed but I wouldn’t know where to start.

[JtParticipant]

If anyone could help it would much appreciated.

Our understanding of the One Mix, is that if we enable the PEQ, the IEM iPad should be able to adjust that particular channel in their In Ears however we are finding that it’s controlling the board eq, compression etc.

So are we missing something in setup or is the One Mix strictly for controlling volume and the eq of the actual Aux Send IEM and not the individual channels?

Thanks

[JtParticipant]

Much appreciated on both responses!

[JtParticipant]

Thank you for the response.

What I was referring to was, say for instance the pre amp is hot on channel 1, FOH, that would mean on the livestream side, it would also be hot since FOH would be control and livestream wouldn’t be able to adjust it.

So in that instance, would we have to purchase a second Allen and Heath board, like an SQ 5 and use say like the tie lies or patch through Dante with another card on the SQ 5 thus the SQ 5 would now have digital trim while the Avantis would be pre amp?

If that makes more since.

[Author]

Posts