Forum Replies Created
-
AuthorPosts
-
2023/09/09 at 9:44 am #114705
Hello ABE My video editor of choice is Final Cut Pro X. It only runs on Macs
Have a great day
2022/12/14 at 12:48 am #110439That was the issue. I was used to the old setup. Once again you have helped me.
Thanks so much
Merry Christmas if we are still allowed to say that lolStupaak
2022/12/13 at 3:35 pm #110431I really thought this would work, because I was not doing it with the Mackie extenders, but the problem persists.I am working from a 2021 Macbook pro and am using Qu 32 v1.97 I have reverted back to Monterey from Ventura O.S .
2022/12/13 at 3:21 pm #110429Thanks for the document
2022/12/13 at 2:41 pm #110424it’s the same as the first execept I’ve chosen DAW midi 2
2022/12/13 at 7:46 am #110421This has to do with the Custom layer. Not GEQ
2022/12/13 at 7:41 am #110419I setup 2 instants of DAW control in Logic. The same problem persists. I have attached a picture. Never had this problem before.
Stupaak
Attachments:
You must be logged in to view attached files.2022/12/06 at 5:11 pm #110349Hope your well, hate to bother you, I have attached a picture of my desk and am wondering what these lights mean, I setup DAW control and this happened. Don’t know if you received the picture, but channels 1,9,17,and 25 green select lights are on and they seem to be synced to each other. When I select a channel each of channels move in unison.
I appreciate any help you can give
Thanks,Stupaak
Attachments:
You must be logged in to view attached files.2022/12/06 at 11:38 am #110345Hello Kiethj, you have given me great advice. The assignments were blank.
Thanks,
Stupaak
2022/12/05 at 11:38 pm #110336I updated firmware and that seems to have fixed the problem.
Thanks you for your inquiry.
Stupaak
2022/11/13 at 10:43 pm #109980So the midi control worked for about a week very well with Ventura. Until it didn’t yesterday it stop communicating with Logic Pro X. I noticed it after I was having issues with my soft control numbers 6 and 7. I reset the soft controls a few times before giving up. I cleared mixes that were in my memory that I wasn’t going to be using. I know kinks are trying to be worked out so I hope this information will help.
I did restart my computer. I also restarted my Qu 32.Stupaak
2022/11/06 at 1:31 pm #109867This is an update. I was able to get my Qu 32 to work with Ventura with no problem. I was the problem. It had been so long since I set up midi control that I had it set wrong. there are some minor glitches but that could be how I have things configured with Logic.
2022/11/05 at 5:22 am #109841Disregard the last post. I accidentally lock custom mode.
Stupaak
2022/11/03 at 8:43 am #109788Looks like I need to update my firmware from .95 to .96. I will update this thread once I do.
Stupaak
2022/06/08 at 10:53 am #107485Yeah I’m trying to use DAW control. Looks like logic got rid of midi environment, so the old DAW control video didn’t help me.
-
AuthorPosts