Forum Replies Created
-
AuthorPosts
-
2012/05/05 at 4:30 pm #30505
Not that I can see. You have 8 gangs in the system. Do you need more than 8 stereo channels? If not, you can gang two together and then hide the ganged channel on the bottom layer or not assign it to a fader at all. That way you have 1 fader that is effectively controlling 2 channels. I’m doing this now for some stereo keyboards and it works great.
T112/IDR48
T80/IDR32
iPad 2
Linksys/Cisco E3000 router
Everything updated to current Firmware2011/05/17 at 7:56 pm #28274quote:
Originally posted by Christopher Johnsonquote:
Originally posted by soundman47quote:
Originally posted by Christopher Johnsonquote:
Originally posted by soundman47So I just went and bought the Belkin Play N600 HD that was recommended at the beginning of this thread. I hate it. I got it and went in and configured it and the system connected right away but NO METERS. I tried everything. This router doesn’t give you the advanced options to go in and do what you need to. I then switch back to the Netgear WNDR4000 (N750) and the meters came back . . .and then they froze again. This is the problem I am having with the Netgear unit. I have been watching it with the stopwatch on my phone and it freezes right around 4 min. every time. I still have control over the console, just no meters. If any of you have this router working correctly, I would love to know your router configuration to make sure that I am not missing something. I don’t know what else to change.
Thanks!
JaylonT112/IDR48
T80/IDR32
iPad 2
Netgear N750 router
Everything updated to current FIrmwreJaylon,
When you say you have control over the console, Do you mean the mixpad app working without the meters?
Have you factored out any wireless interference?
Not sure if you are testing it in the same place or area, and have you moved the router to a different spot?
Do you have any other connections to the router?
Interesting that the same issue is present with a different router.Start with one connection at a time.
I have done this recently to factor out ip issues, and added one extra connection at a time to find problems.
I recently reconfigured my IP addresses and started fresh.
Editor first, started mixpad, then I threw itweak in from my ipod touch and then finally, connected my T112. It all worked at the shop, but it also slowed down performance of the entire system with that many connections.Here is my reality…when you take all your gear to a different place or room, there is no guarantee your going to get a rock solid wireless connection.
I am limiting my wireless connections at future shows.I can relate to your struggles, and hope you figure it out soon.
CRJ
Oswego, ILT112 & iDR48
Sony F 1.73GHZ I7 8 Core
Win 7 Pro 500GB HD 8G RAM
TP-Link WR1043ND
Airport Extreme & Express
Dante May?Christopher, yes. The mix pad app is working, just the metering stops. Just to clarify, I never had both routers hooked up at the same time. I also had the issue at the show and back at my office. I didn’t have the same issue with both routers. The Netgear would give me meters and then the meters would freeze after about 4 minutes. I never got meters on the Belkin unit.
I just got back from the store and went and bought the Cisco/Linksys E3000. The only thing I have done to it was change the IP address so there is no conflict with the system. I just connected it to the iLive setup and WHEW! Everything is working fine and I have been watching my meters bounce around for almost 10 min. I don’t know what the difference is but I think I will be returning the Netgear and keeping the Cisco. I’m going to see how long this will run and post an update if it locks up.
Thanks!
JaylonT112/IDR48
T80/IDR32
iPad 2
Netgear N750 router
Everything updated to current FirmwareAnother user recommended that E3000 to me as well.
Great, If it works for you- I will put that one first in line.
Keep us posted, please.CRJ
Oswego, ILT112 & iDR48
Sony F 1.73GHZ I7 8 Core
Win 7 Pro 500GB HD 8G RAM
TP-Link WR1043ND
Airport Extreme & Express
Dante May?Ok. I’ve tested the hell out of this. A few hours now, turning wi-fi on and off, changing from channel mode to mix mode on the app, launching Editor, you name it. ROCK SOLID! The Linksys/Cisco E3000 is hands down the winner. I know that it is going to be replaced by the E3200 (I hope they are the same). It was VERY simple. All I did was set the IP address of the router to 192.168.1.11, change then SSID names, and set my own password and have had NO issues for the almost 3 hours. I HIGHLY recommend using this router for the mixpad app & editor.
Thanks for the help!
JaylonT112/IDR48
T80/IDR32
iPad 2
Linksys/Cisco E3000 router
Everything updated to current Firmware2011/05/17 at 5:11 pm #28272quote:
Originally posted by Christopher Johnsonquote:
Originally posted by soundman47So I just went and bought the Belkin Play N600 HD that was recommended at the beginning of this thread. I hate it. I got it and went in and configured it and the system connected right away but NO METERS. I tried everything. This router doesn’t give you the advanced options to go in and do what you need to. I then switch back to the Netgear WNDR4000 (N750) and the meters came back . . .and then they froze again. This is the problem I am having with the Netgear unit. I have been watching it with the stopwatch on my phone and it freezes right around 4 min. every time. I still have control over the console, just no meters. If any of you have this router working correctly, I would love to know your router configuration to make sure that I am not missing something. I don’t know what else to change.
Thanks!
JaylonT112/IDR48
T80/IDR32
iPad 2
Netgear N750 router
Everything updated to current FIrmwreJaylon,
When you say you have control over the console, Do you mean the mixpad app working without the meters?
Have you factored out any wireless interference?
Not sure if you are testing it in the same place or area, and have you moved the router to a different spot?
Do you have any other connections to the router?
Interesting that the same issue is present with a different router.Start with one connection at a time.
I have done this recently to factor out ip issues, and added one extra connection at a time to find problems.
I recently reconfigured my IP addresses and started fresh.
Editor first, started mixpad, then I threw itweak in from my ipod touch and then finally, connected my T112. It all worked at the shop, but it also slowed down performance of the entire system with that many connections.Here is my reality…when you take all your gear to a different place or room, there is no guarantee your going to get a rock solid wireless connection.
I am limiting my wireless connections at future shows.I can relate to your struggles, and hope you figure it out soon.
CRJ
Oswego, ILT112 & iDR48
Sony F 1.73GHZ I7 8 Core
Win 7 Pro 500GB HD 8G RAM
TP-Link WR1043ND
Airport Extreme & Express
Dante May?Christopher, yes. The mix pad app is working, just the metering stops. Just to clarify, I never had both routers hooked up at the same time. I also had the issue at the show and back at my office. I didn’t have the same issue with both routers. The Netgear would give me meters and then the meters would freeze after about 4 minutes. I never got meters on the Belkin unit.
I just got back from the store and went and bought the Cisco/Linksys E3000. The only thing I have done to it was change the IP address so there is no conflict with the system. I just connected it to the iLive setup and WHEW! Everything is working fine and I have been watching my meters bounce around for almost 10 min. I don’t know what the difference is but I think I will be returning the Netgear and keeping the Cisco. I’m going to see how long this will run and post an update if it locks up.
Thanks!
JaylonT112/IDR48
T80/IDR32
iPad 2
Netgear N750 router
Everything updated to current Firmware2011/05/17 at 12:32 am #28257quote:
Originally posted by BiggsoundsI’ve had rock solid performance on my cheap Netgear router, I’ve just ordered the Belkin (I need the gigabit throughput for Dante!) – here’s hoping I haven’t jinxed it swapping routers (worst case I’ll leave the Netgear in the rack just for wireless operations)!
iDR32 mixrack
MixRack for iPad & Tweak for iPhone apps
Asus N61 Laptop (x2 wireless)
Sennheiser IEM (for PFL)
Dante card (soon!)You said you have had rock solid performance on a cheap Netgear router. Do you know what you settings are inside the router?
T112/IDR48
T80/IDR32
iPad 2
Netgear N750 router
Everything updated to current FIrmwre2011/05/17 at 12:27 am #28256So I just went and bought the Belkin Play N600 HD that was recommended at the beginning of this thread. I hate it. I got it and went in and configured it and the system connected right away but NO METERS. I tried everything. This router doesn’t give you the advanced options to go in and do what you need to. I then switch back to the Netgear WNDR4000 (N750) and the meters came back . . .and then they froze again. This is the problem I am having with the Netgear unit. I have been watching it with the stopwatch on my phone and it freezes right around 4 min. every time. I still have control over the console, just no meters. If any of you have this router working correctly, I would love to know your router configuration to make sure that I am not missing something. I don’t know what else to change.
Thanks!
JaylonT112/IDR48
T80/IDR32
iPad 2
Netgear N750 router
Everything updated to current FIrmwre2011/05/14 at 11:07 pm #28231I’m hoping someone can help me. I did a show last night for the first time using the MixPad app along with my T-80 & iDR-32. I went and bought a new Netgear N750 router (it was 1 of 3 that A&H suggested to me – not a cheap unit). I’ve checked the multicast settings (i think), turned off a NAT filter that was blocking the metering and everything came up. The problem is that after a few minutes of using the app and switching between aux sends and mains, the metering stops. I still have control. I’ve tried turning off then on the 3 switches in settings, nothing. The only way to get metering back is to restart the app. Then the same thing. Only a few minutes of use and I have to restart. I’ve tried turning off the wireless security and it made no difference. I’ve tried the 2.4ghz & 5ghz feed, no difference. I’ve made sure that no other apps are running, no difference. The settings in this particular router are a little above my networking skills. I am wondering if there is something else to set in there. I’ve read through the forums and cant figure this out. I will be doing the same show again tonight and would love some suggestions.
Thanks!
JaylonT112/IDR48
T80/IDR32
iPad 2
Netgear N750 router
Everything updated to current FIrmwre -
AuthorPosts