Forum Replies Created
Viewing 5 posts - 1 through 5 (of 5 total)
Viewing 5 posts - 1 through 5 (of 5 total)
I sent a support ticket to ask about Mountain Lion support, they confirmed that it would be supported in 1.9
Jack
Haha not sure this counts as a lync mob!
I misunderstood the powerpoint, I thought Nov 5th was the release date.
Will sit tight
FoH Sound Engineer Plymouth Students Union
quote:
Originally posted by dymondaudioquote:
Originally posted by scratchedguitarGetting a very strange issue, whereby editor will get either
‘See’ the rack but come up with a connection error on attempting a connection
‘See’ the rack, come up with the user page, login and get to 13% before dropping the connection…
This is over ethernet, directly into the rack… Any suggestions?
FoH Sound Engineer Plymouth Students Union
Assuming you are just using a computer (rather than a surface) it sounds most likely to be an ip address conflict between your computer and rack. We’re based in Cornwall if we can help any further.
Cheers
Mattidr-32 & T80 + iPad2/Editor
don’t think it is
I’m running two systems both getting the same issue
System 1
Acer laptop
static ip 192.168.1.30
subnet mask 255.255.255.0
gateway 192.168.1.254
System 2
Macbook running Mountain Lion
Windows 7 in parallels (Bridged ethernet mode)
Mac
192.168.1.31
subnet mask 255.255.255.0
gateway 192.168.1.254
Win7
192.168.1.32
subnet mask 255.255.255.0
gateway 192.168.1.254
Exactly the same issue occuring…
(Macbook and Acer were not connected at the same time)
This seems to occur both in Mixrack only and surface and mixrack mode.
The ‘unsupported’ Mountain Lion version connects every third/forth time in Surface with Mixrack mode.
Any thoughts?
FoH Sound Engineer Plymouth Students Union
End of the working day in the UK
Any news?
FoH Sound Engineer Plymouth Students Union
Getting a very strange issue, whereby editor will get either
‘See’ the rack but come up with a connection error on attempting a connection
‘See’ the rack, come up with the user page, login and get to 13% before dropping the connection…
This is over ethernet, directly into the rack… Any suggestions?
FoH Sound Engineer Plymouth Students Union