[SchuifRobParticipant]

+1

And a “block select” like on the GLD, please.

Rob

[SchuifRobParticipant]

I’d love to see the following behaviour:

“Normal” mute group: mutes the assigned channels and all its outputs except direct out

“DCA” mute: same as if the DCA fader is pulled down, thus not effecting pre fade auxes (and of course respecting the options chosen in direct output settings)

Regards,
Rob

[SchuifRobParticipant]

+1

[SchuifRobParticipant]

I suspect the bios to have an “auto start on power” setting which tells the main board to boot whenever power is present. A drained battery may cause that option to be “forgotten” due to the loss of battery voltage.
Seems to me that the jumper is that setting in hardware form. Not to override a battery check.

Regards,
Rob

[SchuifRobParticipant]

Yes please!

[SchuifRobParticipant]

Yes please. And a ducker as well…

[SchuifRobParticipant]

My bad. I guess I was too much in a hurry when testing this. Didn’t see the feedback knobs move so I thought it wasn’t implemented. Must have been user error.

[SchuifRobParticipant]

Yeah, that’s a fact. How could anyone assist you in another way than confirming this?

Regards

[SchuifRobParticipant]

Nope, no SQ in sight until December.
Like I said, the stylus works to select stuff, and adjust gains. But I can’t grab the actual fader. I doubt, however, that this behaviour changes when a desk is connected.

Regards,
Rob

[SchuifRobParticipant]

Toggle with a soft key maybe?

[SchuifRobParticipant]

+1 maybe like the talkback button where a long press is a press and hold function and a quick press is a toggle

Isn’t this already the behaviour of the talk button when “latch” is activated in the menu?

Regards,
Rob

[SchuifRobParticipant]

+1!

[SchuifRobParticipant]

As far as I remember you can use 2 mono matrices as well. Or am I mistaking? 🤔

Regards, Rob.

[SchuifRobParticipant]

How are things wired? Did you check things with a pretty standard mic like a SM58? Is your cabling ok? Did you try patching one of the mics directly to one of the boards inputs?

[SchuifRobParticipant]

And maybe add the ability that the iPad app follows the desks channel layout (like the Qu app).

Regards, Rob.

[Author]

Posts