Forum Replies Created
-
AuthorPosts
-
2021/10/09 at 2:41 pm #103901
I get it.
Then it would be useful to have a button that when pressed in multitrack recording is not affected if the gain value is changed.
Would this be possible? For me it would be very usefulAlessio
2020/12/28 at 6:11 pm #97710Thanks to all of the suggestions.
I realized that not everyone could use it, but some do. So if you could have a screen like the one in the picture, either on the left or on the right, where you can see only the parameters and no graphic representation of the eq would be welcome. Always keeping all screens present now of courseThanks Alessio
2020/12/19 at 4:34 pm #97473Mike C, corrected that I can use the eq knobs on another page, but I have nothing on hand. The 3 knobs of the eq show nothing, they have no indicators. I would like there to be a screen that displays only the parameters as in the photos I attached earlier. It’s fine to see the parameter values, God forbid, but if it were possible not to see the graph it would be better (or with a hide / show button).
Alessio
2020/12/19 at 2:08 pm #97467I confirm with what ioTon says.
Having a screen like that of the midas pro x, regarding eq. I attach image
I confirm that the function would come in handyAlessio
Attachments:
You must be logged in to view attached files.2020/12/19 at 12:13 pm #97463That’s right I agree with you. You don’t have to mix by looking at the waveform but by using your ear. That’s why I asked for this function, just to mix using the ear.
Therefore I would like to review the same thing in a digital mixer as in an analog mixer. See attached image in the previous post, leaving only the parameters
If it is not clear in case I answer againAlessio
2020/12/18 at 7:12 pm #97443It would be very useful to be able to equalize a channel without seeing the waveform that comes out but only the parameters.
It would be like seeing the equalizer of an analog mixer channel. Sometimes seeing the waveform that comes out you get scared and you want to change it and make a wrong eq but with a more beautiful waveform.
It would be very useful for me to be able to see only the parameters of the eq and that’s itI wish there was a button on that screen that if you press it leaves only the parameters, while if you click it it also shows the waveform that comes out. It would be something similar to what I attach, hoping that you understand
Alessio
Attachments:
You must be logged in to view attached files. -
AuthorPosts