Forum Replies Created
Viewing 7 posts - 1 through 7 (of 7 total)
Viewing 7 posts - 1 through 7 (of 7 total)
Hello I have the same problem with my SQ6, a pop that comes out on my auxiliaries in a short and loud way as if someone had just unplugged a microphone without having mutated it. It does this every 15 minutes or so. It’s quite annoying whether live or recording studio. It startles everyone and it’s not at all pleasant for the ears. Not to mention my returns that get this clicking noise. My firmware is at version 1.5.4
Bonjour
j’ai le même problème avec ma SQ6, un pop qui sort sur mes auxiliaires de manière bref et fort comme si quelqu’un venait de débrancher un micro sans l’avoir muté. Ça fait ça toutes les 15 minutes environs. C’est assez gênant que se soit en live ou studio d’enregistrement. Ça fait sursauter tous le monde et c’est pas du tout agréable pour les oreilles. Sans compter mes retours qui se prennent ce bruit de claquement. Mon firmware est à la version 1.5.4
Non RS la console et les moniteurs ne sonts pas sur le meme circuit electrique. D’ailleurs j’ai branché la console sur d’autres prises electriques pour vois si le problème persistait. j’ai meme coupé les disjoncteurs inutilisés de mon tableau électrique pour voir si il y avais un lien.
I made a video. watch until the end
Yes I have a second console and i plugged the out into the input of the second console. Buzz is here
I muted all FX and all aux
monitoring and cables are not involved because I have already checked. . the buzz comes from all the auxiliaries. I think the headphone output is not on the same auxiliary circuit.
Hi Jeroen
The buzz is on all aux outputs included the master but not in my headphones.
My set is simple MacBook Pro, SQ6 mixer, monitoring Yamaha.
I unplugged all inputs, the usb too and I tryed all the aux out one by one. When I mute the aux the buzz is always there.
I reset the mixer but it not resolved the problem.
I tried on other alimentation outlet too.
Please create an account to get started.