Forum Replies Created
-
AuthorPosts
-
2020/09/08 at 8:01 pm #94730
My config is simple: C3500 + Dante64 in port 4 – Cat cable to Macbook pro 15 retina 2015 + DVS running and recording to reaper π
2020/09/07 at 5:16 pm #94702Hello Folks,
I have another issue with dante setup on Dlive. Or my knowledge is too poor to do this correctly.
I have Date 64×64 card in my dlive C1500 or C3500. Is it possible to have a stable connection for recording and playbacks without weird dropouts, if the SYNC of the mix rack is set to internal clock?? Or I have to always switch to syncing to dante card??
With the software 1.82 I had only issues when I was trying to do Virtual Soundchecks. I then always had to switch to Dante card Sync. But now with firmware 1.84 I got several recordings with drops. Therefore I switched permanently to Dante sync in my mixrack.
What am I doing wrong??
Cheers π
2020/05/09 at 9:00 am #91710Hey π
Steffent thank You for this huge explanation. Yes definetly the biggest issue is reverbs, and delays in Dlive. Well Issue is a hard word, but for what this console is it could have better FXes ( that remind me about digicos FXes).
External PCIe Dante cards with box to run it is unfortunatelly out of my budget. But I will check. Still I though that Dlive architecture will compensate to everything that would be inserted on the channels even if this is external processing via Digital link of course. i guss I misread it π
thank You all for help. As soon As the Covid ends and I start to work again i will try tu bilt this connection and will let You know how it goes π
2020/05/08 at 8:42 pm #91692Thanks Steffen π That cleared my mind a bit.
Timecode is not a problem as we use it for the lighting guy and it’s already implemented in Utrack track nr 8 and i’ve already thought about it as a synchronising method.. I am not sure about what utrack can do with Midi unfortunatelly.
I will have to make deeper search about that. If I use utrack only tu start the session in the reaper that should do the trick and then You are right – I don’t need bome box.
Geting back to the live professor and Dante.
if I setup Live professor on another computer will I be able to make latency enough to insert plugins (at least some of them) via Dante card?? or i will be able only to use it for reverbs and Delays?? ( which in my case are 90% what i need )??
Will I be able also to record multitrack simultaneously on another computer via dante?? Or it’s just a russion rulette?? π
2020/05/06 at 4:43 pm #91655How can i send midi from utrack directly to the reaper if they are 70m away?? The only gateway to do this and not to spend more money on more cables and interfaces, etc is to send it via dlive tcp/IP midi. Plus starting with midi shouldn’t give me a synchronisation?? or the latency would be to big??
2020/05/06 at 1:17 pm #91651Correct me if I am wrong but I do need a bomebox to get standard midi signal via din-5 and connect it to dlive CDM48 TCP/IP Midi port (ethernet).
Here I have attached a simple diagram with signal and command flows
Attachments:
You must be logged in to view attached files.2020/05/06 at 11:18 am #91649Hey π
Steffen Let me be more clear. I just want utrack to start the midi session in reaper. As reaper session is my backup session if utrack fails, I need Reaper ( NOT utrack) to send commands to change scenes in dlive. I am new to midi so this is why I am asking maybe stupid questions π
2020/05/03 at 6:18 pm #91597You missed my point. I need Utrack 24 to activate the whole chain as this playback machine have only midi out. So when the drummer hit play on it I need it to send a midi command to Reaper to start, and then reaper should send scene changes to the dlive console.
2020/05/03 at 10:27 am #91588Thank You for Your answer π It gives me more to think. Is it possible to use utrack only as a midi starter for reaper and then reaper will send scene changes to dlive console??
2020/02/11 at 5:41 pm #89491Hello thanks for your answers. I Will check this bomebox for sure.
I Just need the utrack to be my main midi device as this device have onli midi out and I can program the Command in it sp when the drummer Will hit play it will start my shows. Can i do that?
-
AuthorPosts