[mumawuParticipant]

Thank you Mark, that works fine.

[mumawuParticipant]

Do you have more than one firmware on the usb device? Delete all firmware files, empty the trash and copy the new 1.71 on the usb. That should work.

[mumawuParticipant]

I think there is something going on between the network and the new functions on Qu-Pad.
With 1.7 you can control so much more things, maybe there is any bug? After disconneting the Network/Access Point and reconnect it – everything is ok, I think.

It´s difficult to recreate the thinks – cause it´s always an other thing happening, or even not. Weird.

[mumawuParticipant]

No, 1.71 doesn’t fix the problem. I have updated today and I am using my Qu-16 NOW. Some minutes ago 4 faders had a very special position, without touching it. 2 ch paired together had different positions. What’s that?
All channels have been on lowest position befor.

I used my iPad for soundcheck. Logged out and disconnected from my Airport Express. The Access Point was still connected with the Qu-16.

[mumawuParticipant]

Does anyone else have this random fader move problem? I still have it. Sometimes. But couldn´t see a reason for it.

Only thing:
One time I had this problem 4 or 5 hours after I disconnected my iPad from the WiFi, after using it with the Qu-16.
As long as there was no iPad connected or is still connected, nothing happens. After disconneting it, some hours later the Qu-16 will do this fader movement.

Does anyone else have this problem?

[mumawuParticipant]

I did have the same problem with my Qu-16 after updating to 1.7
At a little show I did only with playbacks. 2 times in about 5 hours my playback faders went to zero. And there was no iPad connected or any other device. And I also didn´t touch the mixer at the moment the faders moved.

I think this could be a bug.?!

[mumawuParticipant]

What USB cable are you using? I had a big problem with long thin cables. Always electric noise on all channels. Using a big one with EMI filters solved the problem. Or one with a repeater.

I think the cable has to be a good one, not a cheap one.

[mumawuParticipant]

I have communicated the problem with to many files to the support. They told me it is a bug and it will be solved in the next firmware update.

[mumawuParticipant]

Qu-16 Editor for Mac and Windows please. I think there couldn´t be an easier way of configuring the whole desk.

[mumawuParticipant]

Nobody can help? Nobody has the same problem like me?

[mumawuParticipant]

That´s fine, but doesn´t solve my problem 🙂
How much files do you have on your USB Drive and how large are these files?

[mumawuParticipant]

That isn´t right. It plays all my 44,1/16 wave files. And if the files are 30 – 50 MB it shows more than 50 files. The manual on says:

Playback: 44,1 or 48 / 16 or 24 bit.

[mumawuParticipant]

Hi Nicola

I´m running V 1.31 – earlier versions didn´t have this problem. Everything works fine.
I was trying Broadcast Waves in Cubase 7 – unsupported format. But I didn´t tried WAVE64.

The support ticket will be submitted today.

[mumawuParticipant]

The Noise isn´t from ST3, because I have plugged in a mini-jack and the CH is turned off and muted as well.
I don´t know, but the click noise isn´t coming all the time. Sometimes there is a click, sometimes not. In WaveLab or another DAW software isn´t any noise and I also don´t see anything that could produce these clicks.

[mumawuParticipant]

That´s exactly what I mean.

[Author]

Posts