Forum Replies Created
-
AuthorPosts
-
2022/07/24 at 12:35 pm #108174
This would be a great feature on Avantis, as our Frontline musicians are on St Aux IEMs so I can talk to them, but not the rest of the band on ME1s.
2021/10/23 at 11:45 pm #104161dSnake is a protocol by A&H, you are correct the box pictured is just an adapter, there is nothing digital about that box.
You can use the AR2412, AR84 or the SB168 originally designed for the GLD but made compatible with the newer consoles also.2021/10/23 at 10:01 pm #104156This works with Dsnake if you’re using one of the Allen and Heath boxes that are also made for the GLD.
2017/12/03 at 1:55 pm #66660It has side chain filter on the compressor isn’t that good enough for you 😉
2017/12/03 at 1:41 pm #66659That is the way the system was originally designed to work.
If you can’t get everything you want in the Aviom’s then group a few things on an Aux or group and feed that to one of the Aviom channels.2017/12/03 at 1:35 pm #66658Thanks for your input guys, this network is very limited, only 2 or 3 people on this router at most so traffic is very limited.
2017/11/19 at 7:42 pm #66379Could really use a width slider in the PEQ section like the QU app has.
2017/11/19 at 7:36 pm #66378I have had no issues at all.
2017/09/04 at 10:56 pm #65122I just installed this one and it works great.
TP-Link 8-Port Gigabit Ethernet PoE+ Rackmount Energy-efficient Switch with 124W 8-PoE+ Ports (TL-SG1008PE) https://www.amazon.com/dp/B00E6LID0S/ref=cm_sw_r_cp_tai_uKDRzb6YCGWSC
2017/09/04 at 10:53 pm #65121I just installed this switch.
TP-Link 8-Port Gigabit Ethernet PoE+ Rackmount Energy-efficient Switch with 124W 8-PoE+ Ports (TL-SG1008PE) https://www.amazon.com/dp/B00E6LID0S/ref=cm_sw_r_cp_tai_uKDRzb6YCGWSC
Works great! With our ME 1s and GLD 112
2017/09/04 at 10:45 pm #65120This is a big oversite, logins need to follow permissions.
2017/09/04 at 10:38 pm #65119An extra custom screen or two would be great, I use I very different setup most evenings vs mornings, but most mornings are the same so I am always having to set up the screens again each time.
Also ability to name Softkeys, we have many assigned to mute/unmute FXs but on the iPad you have to memorize what is what on the board we used a small label maker.
Agree that login should follow permissions set on GLD but haven’t run into many problems yet as only two of use regularly use the app.
Not sure why everyone needs another meter screen but it could be useful for some, I just use the meters on the faders as my meter screen, can watch my gates and compressors there too.(love it) 🙂
2017/09/04 at 10:27 pm #65118I know this is an old post and I Hope you got this resolved, but here is my two cents.
The fact that it is the same channel on both boards I would say you have a hardware problem.
If it moved around or was on multiple channels I would suspect the cable first, make sure it is a Cat 5E or Cat 6 STP (shielded twisted pair).2017/09/03 at 9:08 pm #65108A&H recommends shielded Cat 5E for installs, and that’s what I used, but some of my shorter cables are not shielded and they are fine.
2017/09/03 at 3:54 pm #65102You mentioned the levels changing are groups and DCA’s, they will change as they are output buses.
The individual inputs can be raw feeds depending on settings of where the Dante is fed from. -
AuthorPosts