[mosesParticipant]

quote:

---

Originally posted by Stealth

Hi Moses

To output audio to a PortB module you need to go to the Outputs page on the surface touchscreen and select the PotB tab. If you have your MADI card fitted to Port B it will say ‘PortB:MADI’

You should then be able to select channels 1 – 64 and choose what source you would like to send out of the Port B MADI e.g input direct out or Mixrack inputs.

To recieve audio to input channels on the iLive from an external source select the preamp of a channel and select the source PortB:MADI and you will have a choice of MADI channels 1-64.

To set all input channels to source there inputs from PortB quickly go to the ‘mixrack setup’ page then ‘mixer preferences’ – ‘Quick input source setup’: here you can tell a range of inputs to source audio from either Port B or local inputs.

Note:
You need to make sure you have the correct audio clock setup. If you wish the iLive to be the master audio clock set the clock source on the iLive to Internal.
This is the recommended setup for connecting a computer to iLive via MADI.

Physical connections:
iLive PortB Link1 Out port to Link 1 in port on the computer pcie card
iLive PortB Link1 In Port to Link 1 Out Port on the computer pcie card

for further information please follow the link below to the understanding MADI guide:
https://www.allen-heath.com/UK/CategoryDocuments/Understanding%20M-MADI%20-%20rev%2015JAN10.pdf

Hope that helps

Regards
Sam A&H

---

sam i am waiting for some help regarding the madi

[mosesParticipant]

hey sam ,

i am put the same madi cable to my idr 16 and t -80 i can see the mirror inputs coming from idr 48/t-112 to idr 16 /t 80 , but the same cable is connected to the rme card but i can not see the signal coming through , one the soft ware madi 1,madi 2,……. inputs are selected,

please let me know if i can use this rme madi card for recording with ilive

[mosesParticipant]

hey sam ,

i have done whatever you have said , since i run t- 112 and t-80 , i know the patching of the inputs to the madi , i am using neundo 4 for recording all the drivers are loaded and i am not able to record the all the channels on the software please let me know what can be done ,

Regards ,
Moses.

[mosesParticipant]

nop its not working i did that earlier

[mosesParticipant]

is it quiet big process to assign channels to play back and record all the channels for a virtual sound check

[mosesParticipant]

Hey Sam ,
Thanks for the reply,on the display pic there are two cards should we buy both or just one pci card for computer, one card is got madi i/o and fibre optic out , the other card is got midi and madi card so please let me know about this

[mosesParticipant]

thanks i updated the firm ware

[mosesParticipant]

the dealer asked me to wait for a while

[mosesParticipant]

hi sam ,

i am not able to see the logo , and also the pen drive name is sandisk and i am not able to store scenes and all ,

moses

[mosesParticipant]

hey ,
Gil Parente thanks for the info , i still have few doubts on pl 10 , you were saying to create a seperate scene for pl 10 but on what scene is my main foh then and if pl 10 runs on a seperate scene can i send mix 1(aux 1) sends on pl 10 like kick , snare , toms , bass, vocals to pl 10 , so that he can just adjust the volumes levels for few things but can i still change the volume levels from my t-112 , i hope i am clear ,

regards,
moses

[Author]

Posts