Straight run, We installed two new Cat6 lines replacing the existing Cat5 ,we used for the iLive, when we got the Avensis. Same issue on both and I’ve tried a variety of patch leads.
Power is never lost. Powering off and back on will rectify the issue. My colleague was fortunate enough to be looking at the stage box when it went off and the only visual cue was that the ready light went off.
All is good no issues logged.
When it fails there is a barely audible click as if a relay has triggered and then another when it connects again. The desk is still seeing the stage box and you can change the patch etc. The only thing I’ve not tried yet is to pass audio from the stage box as I’m currently only using the inputs on the desk as we are only streaming audio and using a couple of channels of radio mic.
I’m using 6 outputs scattered over the 16 available on the stage box and all fail simultaneously. The more I type it sounds like the issue is likely to be with the stage box.
Hi Steffen.
My initial thought so re ran cables.
The fact its so intermittent makes testing really difficult. Failed within half an hour this morning and no issues since, 3hrs later.
