[Mike CParticipant]

So the video comes out of the computer goes into a “bluetooth device” that device then feed monitors, projectors ect?

What does the live stream end of things consist of…..a video switcher with camera input feeds and a feed from the computer for putting the computer video directly on the stream?
How is the computer video sent to live stream?

Is the audio feed into live stream taken from a mix out on the QU32?

If I’m not mistaken there is the FX insert option on the ST inputs
As for the delay FX that would work, you can open the frequency band pass, set it for no repeats, link the delay time inputs together.
If you use FX insert there is dry / wet mix control on the FX, you would want it fully to the wet mix position.

[Mike CParticipant]

Take the mixer main outputs to the subwoofers, take the crossover / high pass outputs from the subwoofers to drive the power amp that is the running the main speakers.
Between the mixer and subwoofer inputs you may want to put at least an EQ in line.

Maybe find someone in your area who is decently good set up setting systems and running
sound to do some hands on training on the mixer and setting up the system.

EDIT…..I just double checked and those subs DO NOT have a high pass crossover output mode. So you will need to use an external crossover in some form to feed the power amp running the your passive main speakers.

What model power amp do you have, some include crossover functions.

[Mike CParticipant]

…..and with using a stage box you have more assignable outputs.

[Mike CParticipant]

Depends on how you want to run them.
What are your main speakers?

To run them as “AUX SUBS” use one of aux outs to run the subs, set that aux to post fade.

On the GL2400’s the mono output can be set to AUX 6 to feed sub woofers and the main level control on the mono fader.

[Mike CParticipant]

Actually those are not digital but ole fashion analog just using the conductors of the CAT cable.
Not a big fan of those when used as a stage snake on a busy stage.

[Mike CParticipant]

Just to ask are you using a known good cable and monitor speaker ect. that worked when plugged into AUX 1 & 2?
The only routing for AUX 3 & 4 if for the USB output.
For a test maybe try connection a computer to the USB and see if you can get audio for AUX 3 & 4 out of the USB jack.

[Mike CParticipant]

Do you have sound at the headphone jack?

[Mike CParticipant]

The DAW playback tracks/channels will line up with the inputs on the mixer, you need the mixer set to receive the USB input on the channels, USB button next to the trim knob.

It sounds like you installed it but if not you need to download and install the QU driver on the computer.

[Mike CParticipant]

We are using latest firmware & app versions, no AMM, auto-gains not involved, no comp/limiters, min. reverb/effects, and our outputs (1-6) are set to post-PEQ, etc.

Post PEQ is not the same as PRE or POST fader.
For monitors you generally want the mix/aux sends set to PRE FADER so any changes made to the main mix do not cause changes to the monitor mix.

[Mike CParticipant]

Is there anything connected to the USB B connection on the SQ? Though you did say it works fine with the mix app closed.

Generally it’s best to have the mixer on a dedicated network.

[Mike CParticipant]

Using aux outs would work or assign the channels to subgroups as needed and send the sub group outputs to the needed locations. Un-assign those channels from any other mixes.
Build up scenes with various routing configurations.

[Mike CParticipant]

Are you connecting with 2.4 or 5g WIFI. If not 5g try a 5g channel.
Get a scanner app and see what channels are in use. I tend to stay in the lower
5g channel. I use WIFI Man, the scanner apps are just about all for Android.

Are there any other apps open on your ipad?

Also try hiding the SSID broadcast.

[Mike CParticipant]

Was this with a know working USB stick used in the past?

[Mike CParticipant]

So if I understood the the post correctly your pick up direct output the built in mic output were at one time isolated with each output on it’s own mixer channel input?

Does your harp have two individual outputs are does it use a tip ring sleeve stereo cable
that breaks out into two output connectors?

[Mike CParticipant]

Are you recording just a stereo board mix or multitrack?

No mixer control app that I know of will directly play the files.

[Author]

Posts