Forum Replies Created

Viewing 15 posts - 16 through 30 (of 342 total)
  • Author
    Posts
  • #56907
    Profile photo of mervaka
    mervaka
    Participant

    Perfect for mixing with your eyes.. Remember it’s already possible on Qu using GEQ flip while PAFL’d

    #56906
    Profile photo of mervaka
    mervaka
    Participant

    Suit yourself, I just think you’ve picked the wrong tool for the job. I think Mix-> return or Ch-> return would work a lot better for your application.

    #56892
    Profile photo of mervaka
    mervaka
    Participant

    Why not just use an FX bus and return?

    #56778
    Profile photo of mervaka
    mervaka
    Participant

    An entirely pre-digital insert could be placed between the preamp and ADC, but of course then the insert would be tied to the socket, not the channel!

    #56764
    Profile photo of mervaka
    mervaka
    Participant

    Even if you could decode audio and video separately, how would you ensure audio and video stay in sync? Best carry on decoding it at the PC and get yourself a better sound card if the 3.5mm connection lacks reliability or quality.

    #56638
    Profile photo of mervaka
    mervaka
    Participant

    Does noone heed warnings about automatic updates? ;(

    #56637
    Profile photo of mervaka
    mervaka
    Participant

    How on earth have you run it without a surface up until now?

    #56494
    Profile photo of mervaka
    mervaka
    Participant

    Microsoft Surface

    #56461
    Profile photo of mervaka
    mervaka
    Participant

    Looking at the manual, the meters are in dBFS, and the last green LED is at around -10dBFS. 0dB on the Qu meters is at -18dBFS, so you have plenty of headroom to structure your gain hotter.

    #55698
    Profile photo of mervaka
    mervaka
    Participant

    Is there anything in particular you want?

    #55452
    Profile photo of mervaka
    mervaka
    Participant

    Why does a selection need to be persistent? It’s not anything to do with the desk state, it’s just a selection..

    #55429
    Profile photo of mervaka
    mervaka
    Participant

    Can you not feed your sub mix full range? I’m assuming you have some sort of speaker management if you have a dLive..

    #55403
    Profile photo of mervaka
    mervaka
    Participant

    I suspect that DJ requirements are very different from what Qu offers. As DJ mixers are in effect performance devices, they’d need to be a lot more responsive! Xone 43 is an analogue mixer. Only DB series are digital, and those have very limited remote capabilities. DJ afterthoughts on Qu would be very lacklustre for serious DJs. Just go out and buy that Xone 43.

    #55202
    Profile photo of mervaka
    mervaka
    Participant

    At home I use a TC Electronic BMC-2. Suitable for my purposes, but I admit it has a strange complement of connections!

    #55201
    Profile photo of mervaka
    mervaka
    Participant

    Aux fed subs?

Viewing 15 posts - 16 through 30 (of 342 total)