[mervakaParticipant]

Are you sure? Seems like an iLive-T successor to me.

[mervakaParticipant]

Yep

[mervakaParticipant]

Why, what have you heard?

[mervakaParticipant]

Yep that makes a lot of sense now 🙂

[mervakaParticipant]

That is still part of the RTA, you still need to ensure your selected channel is PAFL’d.

[mervakaParticipant]

What do you mean by foldback output, exactly?

[mervakaParticipant]

When you switch in GEQ flip, the meters follow the RTA. In turn, the RTA follows the PAFL bus. The PAFL bus does not follow the selected mix in your master strip unless your master strip is PAFL’d (assuming you have PAFL follow mix enabled).

[mervakaParticipant]

No such thing as a mature product anymore, only developing or obsolete?

John, look at what the dLive ecosystem offers for clues. Your ME stuff is still current, your ethernet snake is still current, your Dante card can be
letterboxed, dSNAKE has been superceded by DX, which in my opinion is fair overall. Early adopters will always pay more, but will tend to get more mileage from their system before the feature releases dry up..

[mervakaParticipant]

The remit of speaker protection really should be with the PA. A good powered PA system will protect itself within the design of the amp modules. Likewise a well set up amp rack will contain protection for any speakers it powers, be that within the speaker manager or amplifier itself.

[mervakaParticipant]

FX return channels lack dynamic tools, so you’d need to feed your FX into a group, and process it there.

[mervakaParticipant]

From what I remember, you’d be right to suspect active sensing. You need to handle it.

[mervakaParticipant]

It’s a stereo soundcard.

[mervakaParticipant]

Oversampling is just dogmatic guff. Working at 48k is fine for studio work for the reasons Bob and George pointed out. People think they need 96k, therefore they need 96k. They can’t explain why.

[mervakaParticipant]

Correct, but that doesnt mean anything beyond physical connectivity. Qu will only see two devices, the second device cannot be a 2412. It will ignore successive devices.

[mervakaParticipant]

Thats what ch-> return is for. Or use mix-> return on a non-fx bus.

[Author]

Posts