Forum Replies Created

Viewing 15 posts - 1 through 15 (of 47 total)
  • Author
    Posts
  • #88861
    Profile photo of guma
    guma
    Participant

    Yes, good idea. Anything flashing to indicate ‘mix mode’ would be great. Flashing integrated LED illumination for the overworked tired touring engineer as an option would be helpful.

    #87512
    Profile photo of guma
    guma
    Participant

    That’s the typical difference between engineering an marketing. 😁

    #87432
    Profile photo of guma
    guma
    Participant

    In the concept of AVANTIS 36 faders would make more sense.

    #86889
    Profile photo of guma
    guma
    Participant

    Please don’t wait to long releasing the editor. Each soundman who’s pleased and comes to grips with the editor is a potential purchaser or supporter of the product.
    Don’t make the mistake you made two times before.

    #86707
    Profile photo of guma
    guma
    Participant

    Old topic formerly misleading but now titled correct for the real successor.

    #86705
    Profile photo of guma
    guma
    Participant

    Actual rumors?

    #85119
    Profile photo of guma
    guma
    Participant

    Yes indeed.
    A ‘less weight, less screen, more faders’ (than c1500) version to control the mix rack would be great!

    #83573
    Profile photo of guma
    guma
    Participant

    Agree, for a higher input channel count it should be up to the users decision to work with a ‘one point stage box solution’ (2 × DX2412) near amp city + analog subsnakes or ‘distributed system’ (DXhub + 3 x DX168) or anything between.

    #83556
    Profile photo of guma
    guma
    Participant

    DX32 will be too expensive for most SQ users.

    #81656
    Profile photo of guma
    guma
    Participant

    Yes you’re right the SMRs sound more realistic than any spx and the plates do a quite satisfying job. In addition it’s neither forbidden to connect any vintage hardware unit that you find in a corner of your store or you can buy for small money to your mixer to give its unique texture to your reverb repertoir nor restricted to add a waves card to a slot. But one single high level algo would be nice …

    #81638
    Profile photo of guma
    guma
    Participant

    I also would be pleased by better reverbs in dLive as well as in DiGiCo SDs.

    #81255
    Profile photo of guma
    guma
    Participant

    … in detail:
    including the choosen deep processing …

    #79113
    Profile photo of guma
    guma
    Participant

    There are so called ‚usb to ethernet‘ adapters for android and iOS in the consumer market, that work. But you need to take care of
    – does your iOS or android version support ethernet?
    – is the adapter successfully used and approved for your type of tablet?
    cause there is no generally recommendable unit.

    #78940
    Profile photo of guma
    guma
    Participant

    I’d like to retain the 8-channel bank view but get a GLD-like one channel overview in addition.

    #73430
    Profile photo of guma
    guma
    Participant

    Good idea but not as simple as it seems to be. I tried to simulate it in the DiGiCo Macro Editor:
    Implementing a common ‘off action’ to a selected channels high pass/low pass, equalizer, compressor and gate is simple but … there is no ‘undo’ option so if you programm an ‘on action’ all processing stages go to ‘on’ even those not choosen before, and if you programm a ‘toggle’ action all those beeing unactive before go to active and vice versa.

Viewing 15 posts - 1 through 15 (of 47 total)