[Luis-WheezyParticipant]

Kris,
Thank you for the reply, that still doesn’t really work it will continue to mute the Aux.

I did find a quick work around that I don’t know why I didn’t think about it, and that’s instead of muting the DCA channel just drop the fader to -infinity. The issue right now is only on our Drums and if the option becomes available later great, but I do have to say that the power that this console has, has calmed me down about the issue

Thanks all for the help!

[Luis-WheezyParticipant]

Wow, I’ve tried a couple of things and what’s got me really confused is on the ML4000 I could send channels to Aux Pre-Fade/Mute and basically I don’t have that option anymore?

I mean I see the Post/Pre option but that only seems to affect fader and not mute button.

My problem is, is if we have 10 Durm channels, 8 Violins, 3 Choir mics, to group those and send them to Aviom using Aux or Group channels when I mute them it cuts the signal to the aviom.

The way around it is to split the channels and create duplicates going to the appropriate Auxs, then I would need 20 Drum channels, 16 Violins, and 6 Choir. That’s 42 of my 64 channels already taken…

Aside from splitting pre-amp channels any other solution that won’t take up so many channels?

[Luis-WheezyParticipant]

Thank you so much!

I knew about the DCA groups because I use those quite often in the ML4000 (as VCA) and was glad to see the iLive could do up to 16. The audio groups was the confusing part, but I now see the use and how they can be implemented.

Thank you,
Luis

[Author]

Posts