[klauskobaldParticipant]

hi,

I am a software developer building a audio installation. So I have a server which runs my php software. And I want to send out TCP commands to the mixer to recall scenes. So there is no “ready software” I am using but building my own.
But thanks, that document might help.

[klauskobaldParticipant]

qu-core is written on the right bottom of the device.
anyhow.
I figured out all the routing. I was not familiar with the concept coming from old analog consoles, so it took me 1 hour, which I found too long. (unpatience)
Some things are a bit hidden.

8 in to 8 out means: route 8 line inputs to 8 line outputs where no 1 in goes to no 1 out. I found out that is best to use the stereo mixes 5-6, 7-8, 9-10, L-R for that.

Since there are enough inputs I can do anything with one scene and setup some qucontrol buttons for the client.

Good mixer – like it.

[klauskobaldParticipant]

I think, I found most of that what I need by tapping wildly 🙂

[klauskobaldParticipant]

Same here – I have it connected via ethernet – lights on Hub are flashing. There are 25 other devices connected as well, most of them over wifi. So, DHCP is working.

[Author]

Posts