Forum Replies Created

Viewing 15 posts - 1 through 15 (of 24 total)
  • Author
    Posts
  • #106966
    Profile photo of KilianB
    KilianB
    Participant

    +1

    #106964
    Profile photo of KilianB
    KilianB
    Participant

    +1

    #106963
    Profile photo of KilianB
    KilianB
    Participant

    +1 for the option of 6 mono matrices switchable to 3 stereo / any combination

    #106962
    Profile photo of KilianB
    KilianB
    Participant

    +1

    #106961
    Profile photo of KilianB
    KilianB
    Participant

    +1

    #106960
    Profile photo of KilianB
    KilianB
    Participant

    Sorry for digging this up again, but the ability to route FX 1-4 mixes out of the console (IO Port would be fine by me) would be amazing!

    Ideally, we could also return signals to the FX Returns (no channel processing necessary)… maybe similar to the “mix external in” feature.

    #106268
    Profile photo of KilianB
    KilianB
    Participant

    +1 for both

    #105731
    Profile photo of KilianB
    KilianB
    Participant

    While I do agree, if you have a lot of critical signals passing through Soundgrid, it is a good idea to be prepared do disable the corresponding routing quickly (as with any outboard processing), I must say that Soundgrid processing has been extremely reliable for me over the last few years.

    Also, 4 seconds seems rather long for switching to the redundant server.

    #105632
    Profile photo of KilianB
    KilianB
    Participant

    It is true: you can only have 1 host application (I believe that’s the term) running on any Soundgrid network.
    These apps are: Soundgrid Studio, Multirack Soundgrid or Superrack Soundgrid (possibly also LV-1).

    However, you can absolutely run Multirack and playback simultaneously on the same computer (and even record the show if you really want to get into it).

    For this to work, you will have to do all the routing in Multirack, which is a bit cumbersome, but once you have it set up, it will be fine.

    I don’t have a computer running Multirack around at the moment, but I believe you need to check the “Soundgrid Inventory” page and make sure your SG driver shows up there and then route the channels you would like to use on the “Soundgrid Connections” Page.
    See page 24 of this: https://www.waves.com/1lib/pdf/live/multirack-setup-9-8.pdf
    for some more information.

    BTW: Routing is a lot more fun in Superrack (very similar to Soundgrid Studio).

    #105608
    Profile photo of KilianB
    KilianB
    Participant

    Hey Robin, in my experience, Soundgrid has been absolutely plug & play with the SQ – as long as your SG network is set up correctly.

    Maybe you could share some details on the set up and maybe a screenshot from the Superrack setup page.

    #99009
    Profile photo of KilianB
    KilianB
    Participant

    Iā€™d really like this feature when outboard plugin servers fail. In case a soundgrid system decides to stop working mid-show, it would be great if I could disable all inserts in one button push so the show can go on uninterrupted.

    +1

    #95960
    Profile photo of KilianB
    KilianB
    Participant

    Cool, I have never used that feature.
    I guess that was really useful on a PM5 or M7.

    However, it doesn’t “redo the patch” – which I think is a good thing.

    I like to keep the original patch, add any extra channels to the end and then (re)arrange the channel strips in a way that makes sense. But that’s just me.

    #95937
    Profile photo of KilianB
    KilianB
    Participant

    as far as I remember on M7CL, QL, CL and Rivage
    but rearranging channels introduces a short break in audio

    Hey Steffen,
    to my knowledge, it is not possible to change the order of input channels on these desks. In fact, that fixed architecture seems to be one of the advantages of the Yamaha boards.
    However, QL, CL, Rivage and even LS9 have user layers which can be populated in any way the user choses.

    I recognize the behaviour you are describing (inserting a channel causes a drop out) from the Avid Venue consoles. I believe on these desks, all following channels will indeed “move to the right” in this case. However, the patch does not change.

    #95818
    Profile photo of KilianB
    KilianB
    Participant

    But i personally would love to see a method like on the Yamaha consoles where you can move a channel, lets say channel 34, to another place, lets say to channel 5, while all channels from 5 to 33 move one slot to the right

    Mfk0815,

    on which Yamaha console can you do this?

    As all channel strips can be assigned anywhere, I feel it actually helps to not also be able to change the order of input channels ā€“ just for the sake of staying sane šŸ˜‰

    #95168
    Profile photo of KilianB
    KilianB
    Participant

    I agree with Mark.

    Momentary mix selection could come in handy!

Viewing 15 posts - 1 through 15 (of 24 total)