Forum Replies Created
-
AuthorPosts
-
2022/05/10 at 7:28 am #107103
This would help a lot!
Or at least an more specific scene filter, so that I can only recall Button F for example.
Just had musicalshows with around 80 scenes, and my last layer changes in each scene.
Then the orchestra changed, and I would have needed to update each scene manually….2021/09/30 at 6:40 am #103745Hi!
Do you have one of them connected to the VGA output of the dLive directly?
Looks as if the monitors would be connected to something else?Best regards
Jürgen2021/09/29 at 1:26 pm #103726Hi, I want to push this question again – now with the RTA the additional screen got higher in the wish list 😉
Any recommendations of screens that some of you are using already?2021/09/21 at 6:24 am #103563I had the first three shows with V1.9, great update 🙂
2021/09/20 at 12:22 pm #103553And it could be useful to display the 12 filters in the south EQ area as well.
2021/08/19 at 1:01 pm #102998Any update?
2021/07/27 at 3:04 pm #102561Should be getting closer to release? 😉
2021/06/11 at 1:34 pm #101850If you have the Waves driver running (Waves QRec or Soundgrid Studio I think) and configured you need to change the Audio device in Logic to Waves.
Make sure your channels in Logic are mono channels.
Then klick on the first channel, and you should be able to select stereo pairs or single outputs (there is a selection for Main, for Busses and for other outs if i have it in mind correctly).
Do this for all your other channels as well.With that you can playback the multitrack in Logic and get all individual inputs in the dLive.
2020/09/20 at 7:45 pm #95097Hi!
Could you resolve these problems?
With a Mac mini with macOS Catalina 10.15.6 it works without problems, with a MacBook Pro with USB C Ethernet Adapters it did not work in the beginning.
The MacBook seems to pick another network interface for the controller, so you need to change it by clicking on the Network icon.
Does it work for you as well?2020/09/14 at 10:53 am #94901Sorry, I did not describe it properly.
It would be nice to use the copy or paste or reset buttons to copy one function from one soft key to another key, or reset the functionality.
So you can start by preparing one button as Mix for DCA, copy it to other buttons and only change the DCA number, without needing to select the functionality on the screen each time…2020/08/18 at 6:24 am #94145Thanks.
Is there maybe a way to use the Stream Deck directly on the console without a computer in between? Would be nice to configure it and have it plugged in into the surface directly.
But if I saw it correctly it always uses the configuration software and then the plug in or the packet sender.2020/07/02 at 2:29 pm #93069Yes, that would be great…
2020/06/25 at 1:33 pm #92864Development of V1.9 is ongoing. It’s fair to say the global situation reduced the pressure for a timely release and we decided to extend development beyond the original scope (i.e. add more features) and release later in the year. We currently don’t have a firm ETA but I would guess June at this stage.
@nicola, any update on a V1.9?
2020/06/22 at 3:33 pm #92762Hi Nicola,
i set up everything to record a video – and it was working from powering up……
Same settings, same scene, same version of the custom control.
Possible that custom control needs a reboot of the Mixrack? The other devices (iPad, Director, …) I had rebooted during the first setup.Now its a really nice solution for the monitor mix.
Jürgen
Attachments:
You must be logged in to view attached files.2020/06/19 at 10:24 am #92711Sorry, dont know what happened to the link – here again.
Custom Control FileA difference I found to your file was that I have it for all users, you have it for Admin. But still – the mutes and the faders to main mix work.
In Custom control I can change the mains or press buttons, then I see the faders changing in Director.
But if I use the AUX sends (mono), they do not change in Director, only in Custom Control?Did anyone have that issue before? Am I doing something wrong?
Thanks,
Jürgen -
AuthorPosts