Forum Replies Created
-
AuthorPosts
-
2013/09/16 at 10:56 pm #34810
missed the webinar, can someone give me a run down of whats in 1.3?
2013/09/04 at 4:22 am #34726Nope i run cat 6 straight from gigabit port to dante module. I’m positive its something to do with setup as the tracks record but don’t sync, audio seems to jump around. is it possible its to do with the buffer sample size?
2013/09/03 at 7:44 pm #34722Already using gigabit, I built a pc especially for it, looks like this
amd fx8320
gigabyte ga990fxa
16gb ddr3 ram
2tb hdd
radeon hd7750I’ve been disabling the wifi and everything
2013/09/02 at 10:44 am #34708the reaal question is, do you need waves? i can’t think of any time i’ve need more than the built in fx. dante gives you more flexibility i think
2013/09/01 at 6:10 am #34704Could someone put up some screen shots of what dvs and the controller should look like, as far as i can tell im doing it right but still ending up with un usable material
2013/08/26 at 8:02 am #34687Did this, still experiencing, not as much but still there
2013/08/22 at 9:15 am #34672My 14mb system log is bigger than their 10mb cap.
FAIL.
2013/08/21 at 8:40 am #34664I have an error log from when this happened, still need it?
2013/07/28 at 9:41 am #34504my churches one has been doing this too.
seems pretty random, no usb attached
2013/06/13 at 2:54 am #34208I think they should have a trade up option, or something i dunno send of your gld80 and they’ll drop the guts into a 112 frame?
2013/05/29 at 8:44 am #34081no groups, inputs are routed to DCA’s then out to main mix, I’ll double check the routing but fairly sure that the ST aux is routed to the right place, besides the changes to the dcas also effect the levels on the other foldback wedges but because they’re not getting somethings in the mix which my volunteer techs seem to fiddle with alot they don’t have the same apparent problem (that and no one else in the team is quite so particular about things as me.
Excuse my ignorance but would it be because a DCA technically doesn’t have anything going through it but acts as a relational fader to cover all channels routed to it? Although bearing that in miind shouldn’t setting the inputs to the aux as prefade negate this?
2013/05/29 at 3:27 am #34078Ok tried this, no luck.
HEre is the scenario. I play drums at my church and use a stereo aux into a mixer for foldback. I have all the sends to it set as pre fade, but when the guy doing sound makes a change to the dca it effects the level of what ever is feeding into the dca through my foldback. As im using in ears and am behind a shield, this throws me off alot as I cant whip out the in ears and rely on stage sound as all I hear is drums.
Is There a different way I should have the gld set up?
2013/05/26 at 7:17 pm #34069Ahh how do I make aux’s pre fade?
2013/03/24 at 10:07 am #33554yeah i can’t really see a problem writing stuff for android aye, my friend who is the local rep said they were planning it(this was before the ipad app was released)
2013/03/24 at 10:00 am #33553A trick i’ve found with the GLD is go to your parametric, do yourself a favour and buy yourself a samsung s-pen(they work! its amazing) and narrow the middle bands up and drag them up and sweep sideways till you find the offending frequencies. then pull them down until you don’t get feedback. Just remember a comfortable speech volume is about 65-70db. don’t try for 90.
-
AuthorPosts