[joanmaleParticipant]

I had a distorting sounds like 24bit/16 conversion distortion which disapear when i moved the faders volume up and down.. yes, fucking strange.
I was trying different latency options (because the midi didnt sincro correctly with audio, yes, in 2017 still a problem) and that distortion disapeared. I also have loops and hangs with mixcraft 8 which im not sure is because DAW, because some plugins or his interaction with the driver and QU24. Havent made an midi integration yet (is very very difficult, only channels 1 to 8 seems to work, but when i move faders my synths are detunned, great), so i’ using a 2500€ mixer for basic purposes, since i use a 25% of it.
I was able to work multitrack for mixig, but the FX of the mixer and the resluts wasnt good enough or better than mixing in the box. e
The idea i have of it is that is good for live (scenes, FX for live etc..) but a bad choice for a studio.
Pros i have to say that for recording it sounds very clear, but even after trying many latency options i always have to edit the audio tracks sent to synth by MIDI to put in correct tempo, i even have to quantize audio because the beats i sent via midi doesnt play all in time.
Not a good choice for a studio.

[joanmaleParticipant]

What about an Aphex Ahural Exciter from the 80s? just like another FX? or passing the main mix through it?

[joanmaleParticipant]

Hi all, after trying a lot of different options, finally the problem was because this freeware plugin
https://www.vst4free.com/free_vst.php?id=1329
Maybe only chrash with mixcraft8 maybe with other DAWs, but that was the problem
Solved converting the virtual instrument in an audio track and deleting the vst track.
Now works GREAT! with very low latency.
I just post here if there is somebody with the same problem.
thanks.

[joanmaleParticipant]

Solved, multiple outputs from the DAW to the mixer

Now, if the mixer is set to receive multiple USB outputs from the DAW, how i record a synth that is connected to, for example, channel 18 (connected by line/jack to the mixer), or how i listen it, i must change the configuration of the table everytime i want to do? ( processing -> FN -> ch18 -> local ) ??
Or there is a layer, for example, MIX 1, where i can hear all connected synths to the mixer?

How i link the mix configuration in the mixer to a project / song ? (haven’t find the way to desk automation yet)

[Author]

Posts