[jmannnParticipant]

I have a SQ5 and a SQ6 and I couldn’t update to 1.5.10 on either board and I have always used the same flash drives to update my boards. I downloaded the files on my 2019 MBP which was recently upgraded to Sonoma 14.0 and unzipped the file and copied the .bin file to my rout directory of my flash drive formatted in my SQ as always. no image found, so I downloaded the same file on my Windows 10 PC and extracted the file with WinZip and everything worked as normal and upgraded the firmware no problem. Can’t say for certain but it appears that my Mac was corrupting the download when unzipping the file. Who Knows

[jmannnParticipant]

You can always start a ticket with Allen Heath support. The Guys there are fantastic to deal with and will most certainly get you sorted out. https://www.allen-heath.com/support/

[jmannnParticipant]

Not sure if your talking about SQ for FOH and another for Monitors but this pdf guide shows how to run 2 SQ’s for that, but you need a slink card in the Monitor console.

Attachments:

You must be logged in to view attached files.

[jmannnParticipant]

The Mix Wizard explains this well

[jmannnParticipant]

Check out The Mixwizard sessions He gives you a dropbox link with some files to play with

[jmannnParticipant]

To elaborate on what Soren said its “Security & Privacy” click Privacy tab at top then on the left Microphone and make sure your Daw the program your using is checked to allow access to your microphone

[jmannnParticipant]

You have to click on the SQ-5 Add-ons tab to get to the GEQ’s

[jmannnParticipant]

MixWizard Sessions EP 2 has some multitrack files

[jmannnParticipant]

Thank-you Mike C for your solid information as always

[jmannnParticipant]

I’ve Had my Qu-24 since 2014 and been using a Sandisk Extreme 3.0 recording multitrack for at least 30 shows without any problems at all. These flash drives are super fast and that’s why they work.

Attachments:

You must be logged in to view attached files.

[jmannnParticipant]

Never used Reaper but with Logic X you have to allow Logic to use the microphone in System Preferences / Security & Privacy / click Privacy Tab / Microphone / and make sure your app is checked . Logic wouldn’t work until I did this. Might be the problem

[jmannnParticipant]

Thanks Scott
Dahh
I just realized they were not on.
Thanks again

[jmannnParticipant]

Thanks for your reply Scott

The send levels are all set at 0db

[Author]

Posts