[jimvoyager]

Congratulations guys.
This has to be the most interesting thread for ages!
My head was spinning just reading what you guys have writen.
I had to sit down for a minute.
This is what forums are for!
I notice that none of the A&H guys have dared to chip in….but I bet they
Are watching.

Jim

R72 & IDR32
MacBook pro

[jimvoyager]

Don’t worry jeff, I think it’s a long way off.
I think they are working on other Projects.
Like lower budget digital boards.

Jim

R72 & IDR32
MacBook pro

[jimvoyager]

Thanks Wouter.
Jim[]

R72 & IDR32
MacBook pro

[jimvoyager]

Yea I would find this concept very usefull too.
A great thing to throw behind a drummer on stage or run out a lectern
For an av presentation.

R72 & IDR32
MacBook pro

[jimvoyager]

In theory it should not matter where you plug the surface in to the power.
However, I recently did a show where I set up the band monitors with the control surface next to the stage (r72 surface) and then when i was ready, moved it to the back of the hall using a local power point.
Even before the console was powered up I had the ‘buzz from hell’ over front of house and monitors!
As soon as the ace link cable touched the r72 in any way I had buzz.
My feeling is it was seriously bad power at that power point. I tried another only a few meters away and all was fine.
Jim

R72 & IDR32
MacBook pro
iPad 2
Airport express router

[jimvoyager]

How good is this forum guys!
I had an answer while I was still at the gig!
Many thanks for those answers.
Just incidentally, I also had a strange buzz that came and went over the
Main front of house system.
I was attempting to isolate the problem and noticed a massive buzz whenever the ace link cable was connected between surface and mix rack and also when my r72 surface
Was connected to certain power supply sockets.
I did not think it was possible to get an earth buzz on this system.
It’s probably part of the cable QOS thing.
Bad power in the venue maybe.
Jim

R72 & IDR32
MacBook pro
iPad 2
Airport express router

[jimvoyager]

I have an R72. It’s a shame the left bank of faders is only 8 wide and
I think the Eq should be on the surface too. But all in all I love it. It’s small and
Easy to use. Most of my shows are 16 inputs so it’s not to hard to keep
Track of where you are. I always have inputs on the left and mixes on the right bank.
Jim

R72 & IDR32
MacBook pro
iPad 2
Airport express router

[jimvoyager]

Hi Richard, have you used the new version yet? I gave up on the old one ages ago and
Sold my iPad.
Does it still lose the connection like it did before, only now it let’s you know?
Jim

R72 & IDR32
MacBook pro
iPad 2
Airport express router

[jimvoyager]

Good inside info Nicola.
Thanks

R72 & IDR32
MacBook pro
iPad 2
Airport express router

[jimvoyager]

quote:

---

Originally posted by levi.parker21

Just got the new iPad today. I did a little bit of checking and found that MixPad is running well on it. The meters might be a smudge slower than on my iPad 2, but it’s really slight. Hopefully A&H will release a mantienence update here soon to help optimize for the iPad (3rd Generation) and ease some of the bugs.

Levi Parker
LEPA Audio

Live sound is like a giant orange gorilla who wants to rip your face off, grab your faders and go to war!

---

Strange to hear the meters are slower on the new iPad?
J

R72 & IDR32
MacBook pro
iPad 2
Airport express router

[jimvoyager]

Yea, that’s the kind of stuff I’m getting too.
The worst part is when I loose the main mix but the iPad still thinks its connected,
But it’s not actually doing anything. I keep telling myself I can hear the change I’ve made, but then I realize! Doh.
Jim

R72 & IDR32
MacBook pro
iPad 2
Airport express router

[jimvoyager]

I have had the blank screen too. It only happened once I think about a year ago, but a reboot sorted it.
Then it happened again last November and was permanent.
I had to have the main board of the surface replaced.
It could be unrelated.
Jim

R72 & IDR32
MacBook pro
iPad 2
Airport express router

[jimvoyager]

Hi there, there is no disadvantage to upgrading the firmware. 1.83 is fairly bug free and has Lotts of new features.
The only disadvantage is the 10 minutes it takes to do it.
All your show files are compatible! Why not do it.
As far as the current thing is concerned, that sounds like a load of junk to me. It’s a software upgrade, how could it change your hardware.

Jim

R72 & IDR32
MacBook pro
iPad 2
Airport express router

[jimvoyager]

It’s nice to see people care enough about ilive to be this passionate
About it.
J

R72 & IDR32
MacBook pro
iPad 2
Airport express router

[jimvoyager]

Yea, it sounds like a great idea to me. I’m not really a big rental company
or anything, just a small independant.
But I’m happy to help out where I can. If the list is there then it is a good resource
for all sorts of reasons including finding operators in any given region that can drive an ilive.
+1

J

R72 & IDR32
MacBook pro
iPad 2
Airport express router

[Author]

Posts