Forum Replies Created

Viewing 15 posts - 1 through 15 (of 20 total)
  • Author
    Posts
  • #85980
    Profile photo of JimmyB
    JimmyB
    Participant

    At 20’ you may or may not get better sound quality. Depends how electronically “noisy” the surrounding area is.

    #85331
    Profile photo of JimmyB
    JimmyB
    Participant

    Mix outs. There’s one for each mix button.

    #85066
    Profile photo of JimmyB
    JimmyB
    Participant

    Ok, I thought it was just me. My iPhone started doing this after the last update! Nothing open that I could find running.

    #83423
    Profile photo of JimmyB
    JimmyB
    Participant

    If you’re going to use it that way, then matching levels makes sense. I’d use 0db.

    #80093
    Profile photo of JimmyB
    JimmyB
    Participant

    I believe the channel gain woukd effect all mixes.

    #78548
    Profile photo of JimmyB
    JimmyB
    Participant

    Get some butter. It’s toaste!

    #72963
    Profile photo of JimmyB
    JimmyB
    Participant

    It’s off by default.

    #71901
    Profile photo of JimmyB
    JimmyB
    Participant

    If it’s other than an A&H light you will most likely need to swap the +-/ wires in the light.

    #70257
    Profile photo of JimmyB
    JimmyB
    Participant

    The QU has to be hard wired to the network. Can you get your router out of the enclosure?

    #67976
    Profile photo of JimmyB
    JimmyB
    Participant

    Thanks. Will check it out

    #67023
    Profile photo of JimmyB
    JimmyB
    Participant

    Yes the top layer return lights are lit up on LR as well as mix 1-4

    #67019
    Profile photo of JimmyB
    JimmyB
    Participant

    I know exactly what you’re saying. There is no way to tap in a 16 note delay much over 100 bpm. A tap multiplier would be a great addition.

    #66937
    Profile photo of JimmyB
    JimmyB
    Participant

    So I got the idea to try mix 2-4. They give me flawless fx. I’ve came to the conclusion mix one has a problem.
    It is used so I guess it needs to go off to the Dr.
    Thanks for all your help!
    There is s ton a great info on this forum.

    #66923
    Profile photo of JimmyB
    JimmyB
    Participant

    Ok. Pic one is the LR selected
    Pic two is the mix1 selected
    I still have no fx in monitor mix.
    Effects are perfect in LR
    THX, jim

    Attachments:
    You must be logged in to view attached files.
    #66909
    Profile photo of JimmyB
    JimmyB
    Participant

    So the sends don’t need to up to hear fx in the mixes. Now I’m totally confused…
    Jim

Viewing 15 posts - 1 through 15 (of 20 total)