[jakethepegParticipant]

Yes, it happened to everyone. And yes, it is now under control!

[jakethepegParticipant]

Yes, someone’s going to have fun cleaning up!

[jakethepegParticipant]

Yes please (for Qu too)

[jakethepegParticipant]

You have to push a little harder with a screen protector on. But I only noticed that for a few days after I put it on and now don’t think anything about it. Doesn’t affect usability at all..

[jakethepegParticipant]

Hello Phil,
I purchase a tablet sized one and cut it up. Not perfect, but works fine.

Thanks,
Jake

[jakethepegParticipant]

I believe only way to do this would be to use hardware (return FXs to a mix then XLR from mix output to channel input).

Regards, Jake.

[jakethepegParticipant]

Hello Lauren,

Channels send to Mixes. Mixes send to Matrices. A matrix allows multiple mixes to be summed and output through one set of L+R XLRs.

You can record a matrix – set Matrix L + R as two of the USB patches (under Setup > IO Patch > USB Audio).

(I use a Qu mixer but I presume the same applies to SQ)

Regards,
Jake

[jakethepegParticipant]

I also suggested a voting/tracking system for feature requests but received a no from A&H a few months back. Best option at present is one suggestion per thread so users can do the +1 replies..

Note to A&H: when you setup the feature requests system, allow each user to prioritize between suggested features. Each user might be allowed maximum number of up votes, or they might be able to sort from most desired to least. More meaningful than just +1’ing suggestions that tickle their fancies..!

[jakethepegParticipant]

+ 1

[jakethepegParticipant]

Congrats A&H on the new family member! Thanks @keithjah

[jakethepegParticipant]

Did you send corrupt file to A&H for bug testing?

[jakethepegParticipant]

Very nice!!

[jakethepegParticipant]

Steve, you mention something that went wrong – what was this?

[jakethepegParticipant]

Good news about the personal monitoring app Keith! Any screen shots you can share??

Thanks,
Jake.

[jakethepegParticipant]

Hello Steve,

I thought you could just choose Mix 1 and then all channels would be selected for adjustment

That is correct.

As requested, exact steps to setup a mix:
1) press the mix select key for the mix you want to edit
2) press and hold down the assign key, then press the channel sel keys to assign/unassign each channel from the mix
3) press and hold the pre fade key, then press the channel sel keys to set channels to be sent pre or post fader
4) adjust the fader strips to control the volume of each channel in the mix
Once the mix is setup, press the mix select key again to return to the main LR layer

Hope this helps,
Jake

[Author]

Posts