Forum Replies Created
-
AuthorPosts
-
2011/10/03 at 6:54 pm #29612
That is a cool unit! Yes, do do want to have both at the same time, Aviom VIA MMO card. We could go back to the ANET 16i interface using that direct outs on the mix rack, but that uses the rest of them and leaves me with none.
I like the cleanness of the MMO and Dante. If anyone has any internel news on development of the product to support this, maybe a timeframe, that would be incredible!.
Thanks CMattE!
2011/03/11 at 2:25 pm #27697GIVE US OUR CARD!!!!!!!!!!!!!!
2011/03/02 at 1:58 pm #27599That did work for me on a global setting, thank you. It sounds a lot better, as expected.
2011/02/28 at 5:16 pm #27570Awesome, I will test and post results. Thank you much, have a nice day.
2011/02/28 at 5:00 pm #27568Apparently the attach image is not working…..
2011/02/28 at 4:58 pm #27567RayS,
Thank you for the response, I am not a routing genius on this mixer yet. The first option you described is it possible to just perform this on the current config, which would be I.E. Mixrack Ch. 1>Surface channel 1>Processing strip>FOH Mix and just apply what is happening to the FOH to the Aviom send from channel one?
Or are you saying “unassign” channel one from the Avion/A-NET send and get my kick source from something else, like an aux send that would allow the processing to pass?
I have attached a screen shot from my offline mode, is this what you are talking about as far as direct output assignments? This just appears to be a global setting and not a per channel basis. Do you know if that is true or am I looking in the correct place?
The other option you gave me, I don’t know how that would apply. Because, we have the musicians “mix” thier own mix with the Aviom unit. We go use a couple Aux group to route to them for a “drum other” mix and some misc. Mic for public speaking. I am confused at how virtually coping channels would allow me to route them processed.
Sorry, just trying to figure it out.
2011/01/05 at 3:14 pm #26992Does the Dante card “have” to reside in the Mixrack? We currently have no open spots, with our Aviom card in there. But we could reconfigure our setup to have the Aviom card in the console. Also, does playback require another scene to be setup, can you not route it just in revers in the same scene to the same channel.
I am hearing mid February for a release, I can’t wait.
Thanks guys!
2010/12/27 at 9:22 pm #26964That is great news! Is that in the board firmware I suppose. I personally have a Presonus studio live, each channel has the ability to playback the stem by enabling the firewire return. So I assume it is something similar to that?
Thank you stix! You made my day
-
AuthorPosts