Forum Replies Created

Viewing 15 posts - 61 through 75 (of 76 total)
  • Author
    Posts
  • #67567
    Profile photo of Flo84
    Flo84
    Participant

    Hi !
    AUX and Groups can be set to mono or stereo in the “mixer config” page.
    You can see that and have more informations in the SQ reference guide v1.0.1 page 46.
    šŸ˜‰

    #67055
    Profile photo of Flo84
    Flo84
    Participant

    Hi !
    And… Have you got a 96kHz version of AR2412 planned in future or only DX168 is available ?

    Thanks

    #65785
    Profile photo of Flo84
    Flo84
    Participant

    Hello,
    Because “direct out” option is in-line on channel and you are using a separate fx bus.
    Signal is drived out the channel to feed the fx rack and the fx return signal back to main mix for ex.

    To do what you want,you can use the fx rack in insert mode and set the dry/wet to adjust the effect level.Direct out option post all.
    But in this setup : 1 fx rack per channel !

    Best

    #65320
    Profile photo of Flo84
    Flo84
    Participant

    Hi!
    Founded via google :

    ā˜ŗ

    #61152
    Profile photo of Flo84
    Flo84
    Participant

    In my case, I use ipad air, he can use the 5 GHz band. Lot of devices use 2.4 GHz and sometimes the aera is satured by wifi signals.
    2.4 or 5 GHz are subdivided in channels and you can to set the channel used by your router.
    You can view the used wifi channels arround you with free applications on smartphone for example and set your router on a free or the less used channel. That improve wifi performance and reduce trouble.
    Need to try in situations…šŸ˜€

    #59293
    Profile photo of Flo84
    Flo84
    Participant

    Hello,

    The main advantage with a digital mixer is that you can save the settings and be able to recall them šŸ˜‰
    As the Qu series.

    You can prepare your gig at home, save settings and recall them on stage.
    Adjust settings in situation and re save them.

    If you have a power failure you can recall the settings.

    I advise you to read the manual managing scenes for informations (page 58 last revision -9-).

    Personally I use a small and light UPS and it has served me more than once …

    Best.

    #55454
    Profile photo of Flo84
    Flo84
    Participant

    Maybe you can use 2 Fx processors :
    nĀ°1 for FOH only with Fx Send set “Post Fader”
    nĀ°2 for Monitor 3 with Fx Send set “Pre Fader”

    Any channels have 4 differents Fx Send that you can indiviually set “post” or “pre” fader
    Fx return for FOH is assigned to LR, Fx return for monitor is only assigned to Monitor 3.
    You can adjust the return level directly in the monitor 3 mix same as FOH.

    #52558
    Profile photo of Flo84
    Flo84
    Participant

    Some informations…
    – I don’t know how…but installation of 3.20.0 on my pc win 10 pro is passed now. But the control panel not working ! sound is Ok.
    – I downloaded windows 10 ISO file from microsoft, burn an DVD and USB key and I made a new installation on formated disk. Driver installation is fully passed !
    My previous windows 10 installation was an update from win 7…maybe it’s the problem source, installation wasn’t made properly.

    Musically !
    Florent

    #52478
    Profile photo of Flo84
    Flo84
    Participant

    Hi !
    Where signal come from ? mic on a stand, inboard mic, piezzo ?
    At the beginning I hear noise, as tapping on the violin. Probably same thing in the rest of mp3…
    Maybe check fixation of mic, wire or connector in/on the violin ?

    Florent

    #52466
    Profile photo of Flo84
    Flo84
    Participant

    Tested today : 3.20.0 on a laptop with windows 7 it work fine !
    But not working on my pc with windows 10… waiting šŸ™‚

    #51693
    Profile photo of Flo84
    Flo84
    Participant

    Hi!
    Some news…
    I have qu-24 at home and I’m trying to reproduce the trouble with the same wifi router and same scene.
    First :
    It is possible that I made a handling error by moving the faders (drag both faders at the same time ) I can reproduce resistance with this.
    Second :
    When I drag one of both linked faders I can feel sometime a lightly resistance but she isn’t constant. Resistance is more softer when faders are not linked.

    Maybe is it only my sensation… but I don’t remember to have the same feeling before with 1.73.

    Need to be confirmed…
    Musically.
    Florent

    #51656
    Profile photo of Flo84
    Flo84
    Participant

    I remember to drag just one…at the same time.

    #44934
    Profile photo of Flo84
    Flo84
    Participant

    Thank you nicola for the information ! Waiting next month for the new features coming with 1.7

    #42872
    Profile photo of Flo84
    Flo84
    Participant

    Hi!
    I think your request is friendly with http://community.allen-heath.com/forums/topic/linking-channels-freely

    šŸ™‚

    #40756
    Profile photo of Flo84
    Flo84
    Participant

    Yes +1, I think too it’s a good feature !

Viewing 15 posts - 61 through 75 (of 76 total)