Forum Replies Created
-
AuthorPosts
-
2016/05/06 at 5:52 am #55520
Hey guys
Thanks for the info was a bit busy recently so i never see the reply.
Im using fx1-3 and fx 1 was the one that needed adjustment which was reverb.
Since fx 4 is free il do that but i want to try what Chris did
thanks for the help2015/10/07 at 9:05 pm #51156Chrome spray paint ?
2015/10/06 at 10:04 am #51109thanks for the advice guys 🙂
Attachments:
You must be logged in to view attached files.2015/10/05 at 6:02 am #51073I have a few shure IEM but he complains that his ears get hot with it. IEM is the easiest way and looks neater
If you delay the monitor as suggested will it not confuse him even more?
On the first day we gave the bands access via their iphones to control their monitors and that was my mistake as the singer just cranked it up.
Did i mention he wanted effects in his monitor and not just a little he wanted to hear how his voice sounds in foh
They had 900 people in attendance and after the first few lines of people the attendees enjoyed the soundHowever Im still not happy with the effects on the vocals I used which was comp, gated reveb and reverb + echo
Anyways Im glad its Monday and Im over with these guys.
2015/10/04 at 12:04 pm #51064His group complains that his monitor is too loud
He complains its too soft
Its him thats the issue he does not gel well with the group
i gave up with him2015/10/03 at 10:29 am #51044He is far from the group at least 6 feet
During virtual sound check i found his monitor to be too loud
used Micro wedge last night and never have much feedback but again he wants it soo loud
Even his group complained2015/09/30 at 6:07 pm #50974Thanks guys
I tries that but he said his ears get hot ?I’m going to Hire two EAW microwedge cause I know that works well
The jbl I have so from a cost point of view the jbl makes sense
But from a sound point no ?2015/07/29 at 2:53 pm #49611Thanks guys,
What software are you using on your mac?
2015/07/29 at 6:25 am #49600I normally do FOH then monitors. To some extent FOH will spill onto stage so you dont need to turn up the monitors too high
I use eaw microwedge 15 which gives very little feedback in my opinion.
I always do a virtual sound check and from the aux sends to a DBX EQ31 GEQ and then to the amp/monitor. use the GEQ to get rid of the feedback2015/07/29 at 5:49 am #49597My thoughts exactly. but i want Daw to work on Windows 🙁 i got Albeton and i know Audition is mainly for post production but was hoping i could use Audition to control faders instead of Albeton
Im going to do some research to see if i can install mac on a non mac laptop2015/07/28 at 7:16 pm #49583Sorry if I’m hijacking your thread but how do you get Daw to work on windows? On the downlands page they only have Daw for mac.
And what software you using. I use adobe auditoN for recordings2015/05/18 at 7:00 am #48088Their are two ways that i have figgured out
Make sure default and all scenes have the same config for soft keys
or
Add soft keys to your safeI use the safe to address this and mix sends
I dont know why the mix sends go to post by itself as the desk comes with pre mix but on the scenes it changes to post by it self.Use the Safes
2015/04/29 at 5:50 am #47621Yesterday i had to also add the mix sends to the safe
although all scenes was done during sound check and all mix sends was on pre and even checked all prior to the show
it changed to post
Had no time to check so just added it to the safeWas very annoyed yesterday. Lead singer came when it started no sound check etc and then tells the drummer to play slow. Who in turn played louder
then he moves his 2 monitor speakers, sings another song and then says he cant here himself. The monitor was so loud the FOH can here it. DisasterThen on the mic he says its still not right which i said through the talk mic that you moved the monitor and thats why. The crowd laughs since the monitors are so loud and he says their is something wrong with the system.
Since the crowd love him im the one who is made to look bad.
Tonight is day 2 of the show and im gona set according to last nights program and tell the lead nicely to please listen to what we can here and what is he trying to achieve
2015/04/28 at 6:33 am #47605I feel like such an idiot
I decided to read the manual again and found exactly what you said
Sorry for the unnecessary threadNote – SoftKey settings are stored in scenes. If you do
not want these settings overwritten when scenes are
recalled then block the ‘SoftKeys’ item in the Global
Filter. Use the Scenes / Global Filter screen.2015/04/17 at 8:51 am #47063That’s a clever idea
hope they do thatI like the lighting on the soundcraft and fx but the qu was better us
-
AuthorPosts