Forum Replies Created

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #102785
    Profile photo of Chris Irwin
    Chris Irwin
    Participant

    I have this exact same issue! It would be nice to have a “lock” button for individual scenes.

    #102784
    Profile photo of Chris Irwin
    Chris Irwin
    Participant

    +1

    #102783
    Profile photo of Chris Irwin
    Chris Irwin
    Participant

    +1

    #102782
    Profile photo of Chris Irwin
    Chris Irwin
    Participant

    +1

    This is the way I am use to it working on Digico consoles, and so working in my smaller venue with an SQ makes it really tough to not have this option! (Yes, I understand they are not in the same league…)

    #102781
    Profile photo of Chris Irwin
    Chris Irwin
    Participant

    I am having what I think is the same problem – the only option for “scene store” on a soft key stores to the current scene. There is no option to store to a “next scene” from soft keys. However, when in the scene manager portion of the touchscreen the “store” button stores to whichever scene is highlighted (i.e. “next”) NOT the current scene, unless you have highlighted the current scene. I would like a soft key to behave this same way; since I have many people using the console, I have them load a template scene, but I want them to store to a new scene, not to accidentally overwrite the template which is most certainly going to happen a lot as it currently stands!

    Second request: can we have a way to lock out a scene so that it can’t be stored over accidentally? (Either without unlocking, or without admin privileges.)

    #88832
    Profile photo of Chris Irwin
    Chris Irwin
    Participant

    As a follow up, I spoke with an A&H employee at NAMM about this today. He said that it is very possible to add the “blend” control to the LCR bus since the dLive already has this feature; however, they have not decided yet if they will add it to the Avantis console. They are playing to the market and so prioritizing which features should be added based on demand; he said this decision can be swayed by people requesting this feature. They take both Facebook comments and the Feature Request forum seriously and give the most value to the ones with higher thumbs up counts and response rates/interactions. So, if you would like this as well, go on over to the Feature Request forum and like/respond to my post about it.

    #88830
    Profile photo of Chris Irwin
    Chris Irwin
    Participant

    Thank you Robby for starting this on soft keys. I would add the following:

    Soft Keys:
    – Apply (enter)
    – lock/unlock the master strip (4 faders)

    – The ability to assign Talkback to more than one aux on the same softkey (i.e. turn it on/off in all wedges).

    #88448
    Profile photo of Chris Irwin
    Chris Irwin
    Participant

    I’m bummed that no one from A&H has responded – however, I found the answer in the recently posted user guide (pg 44) copied below. I am quite bummed that the LCR doesn’t have “percentage” panning as most other LCR busses do. It doesn’t help me to not be able to have something panned center in LR also (at specified amount, not just LR+M). http://www.allen-heath.com/media/Avantis-Firmware-Reference-Guide-V1.00.pdf

    3. Main – Select one of 5 modes of Main mix:
    • None – No Main mix, for example dedicated monitor mixing with a large number of Aux mixes.
    • LR – Standard stereo Main mix.
    • LR+Msum – A stereo Main mix with additional output which is the mono sum of the pre-fade, pre-processed LR mix. For
    example to feed a mono delay speaker or zone.
    • LR+M – A 3-way main mix with independent stereo LR and mono M busses. Channels can be separately assigned to any
    combination of LR and M. Typical application for M is main centre speaker, mono PA or bus-fed sub bass.
    • LCR – A 3-way main mix with LCR panning. Each channel can be panned from left, through centre to right. At mid pan, full
    signal is fed to M and none to L and R. Stereo channels feed the LR mix only.

    #87983
    Profile photo of Chris Irwin
    Chris Irwin
    Participant

    I would like this answer as well – I need LCR capability.

Viewing 9 posts - 1 through 9 (of 9 total)