Forum Replies Created

Viewing 14 posts - 1 through 14 (of 14 total)
  • Author
    Posts
  • #63485
    Profile photo of CeDoMain
    CeDoMain
    Participant

    Hi Pete,

    I agree to you. I can change the name of the Main-Outs and my dLive change the name on displays an labels. But the ROUTING SCREEN does not display theese name. It displays only “Main” for LR-Out and “Main” for C- or Mono-Out. This is confusing.

    Hope you understood now what my problem is. 😉

    #63472
    Profile photo of CeDoMain
    CeDoMain
    Participant

    I would like an option to assign mix keys to the buttons of IP8. If I press an mix Button the IP8 switches all Fader Strips to this mix – like the softkeys on surface.

    #62312
    Profile photo of CeDoMain
    CeDoMain
    Participant

    We’re running v1.4 on S5000.

    #62293
    Profile photo of CeDoMain
    CeDoMain
    Participant

    The software tests this limit only when inserting an channelstrip. When you drag an Spacer from an place in the list to another, the space will be copied. Even if there are more than 24 strips in the list. Then you can fill your spacers with channels – and have more than 24 channels in your view…

    #62181
    Profile photo of CeDoMain
    CeDoMain
    Participant

    Maybe as an I/O card… 🙂

    #62180
    Profile photo of CeDoMain
    CeDoMain
    Participant

    Can someone confirm the strange behaviour of the Space tiles in Meters Setup?

    #62179
    Profile photo of CeDoMain
    CeDoMain
    Participant

    This behaviour is normal, once a screen has been loaded once it will load more quickly on subsequent views of the screen.

    If the Console do this job for me it would be great. Can’t it does this after startup internally?

    #62178
    Profile photo of CeDoMain
    CeDoMain
    Participant

    +1 – this would be a nice feature!

    #61899
    Profile photo of CeDoMain
    CeDoMain
    Participant

    I agree – Clear Function will be much faster. I think about an combination of RESET and DCA-SEL.

    #61898
    Profile photo of CeDoMain
    CeDoMain
    Participant

    If only the Softkeys (not the whole function) can be placed in the widget Area its a powerful addition. 8 Keys per Widget and as an addition you can label them on Screen – in opposite of SoftKeys on the right of Console.

    #61809
    Profile photo of CeDoMain
    CeDoMain
    Participant

    After startup of console there is an delay between selecting and displaying system screen pages. After the first selection of one page this page is showed immediately. The other pages needs to be selected first too to show itself immediately.

    #61808
    Profile photo of CeDoMain
    CeDoMain
    Participant

    On the Console to toggle ALL PRE/POST of AUX 4 you have to do the following:
    1) Press Mix of AUX 4
    2) Press and Hold PRE (between Left and Middle Fader-Bank Rotaries)
    3) Press Sel of AUX 4

    Same for toggling ALL ON/OFF – simply press and hold ASSIGN and press MIX of AUX 4

    #61681
    Profile photo of CeDoMain
    CeDoMain
    Participant

    +1 for Screen Bookmark (or Macros)! It would be quite handy if I can call a special site on System/External Screen directly. Something like:
    – External: Meters > User2
    – System: IO > Surface > DX5/6
    – System: None > Lock Surface

    Also it would be great to configure a Soft Key as a non latching Button. Example: An non latching FX-Mute-Key makes you able to let go only one word to Tap-Delay. To reach this now you have to push the key twice very fast – it makes it difficult to cut the words out.

    Thanks – you make a great job!

    #61619
    Profile photo of CeDoMain
    CeDoMain
    Participant

    Push that. Are you currently working on it? I would like the ability to RESET the banks also.

    You make a good job! Thanks.

Viewing 14 posts - 1 through 14 (of 14 total)