Forum Replies Created
Viewing 12 posts - 1 through 12 (of 12 total)
Viewing 12 posts - 1 through 12 (of 12 total)
I can only change name not colour on the config screen
nobody have a clue..
Volume is very rarely the issue EQ is the way to go
HERE IS A FEW HINTS
Get the EQ right
Of course, there’s much more to good-sounding vocals than simply volume. Vocals also need to be sitting at the right frequencies to truly stand out. While every mix is different, we can follow a general rule to begin: cut anything under 80-100 Hz and consider boosting the 5,000-9,000 Hz range for clarity. There are several more frequency bands than this, and each one highlights a particular aspect of the vocal tone.
For instance, “muddiness” occurs at the 300-500 Hz range, and should be carefully cut, just not so much that the vocals become hollow. Nasal sounds occur around the 800-1,500 Hz frequencies while breathiness stands out at the 10,000-16,000 Hz range. It’s good to know a bit about mixing with EQ to understand where these tones fall, especially in the context of the song. This way you’ll be able to really nail down the type of vocal quality you seek in the mix.
It wouldnt affect the recording of the master out but im trying to record it onto usb stick but its the same om usb to the PC…
Yes if you disable RTA it seems to cure it.
You can set pre/post eq per bus but not per channel and bus.
You do this by selecting a mix and then processing and it’s right at the top
Yeah.. thats what i thought too
He, no im just using all 16
got you now…
tanks..
bonus ?
can I decide if channel should be pre or post eq when sending to aux bus
.
cheers
Thathanks guys thats whats what i told the soundguy i wonder if it could be via new firmware.
HI NZDAVE thanks will give it a try when im home
Cheers
S. Kelly
sorry it wasent a alesis it was a e-mu think its the 1640m
but my with alesis multimix I could choose were to send what output (but not so many outputs to choose from) 😉
Sorry for not being clear 😉
I have a dvd with surround I want to run it on my PC and then run the different sound channels in to seperate channels via USB to my QU 24
that way i can send it to my mix out and also EQ an decide volume my self…
Cheers Søren Kelly
Right enough did’nt think it was possible,
have never really tried a digital mixer that could do that one…😉
Please create an account to get started.