Forum Replies Created

Viewing 14 posts - 1 through 14 (of 14 total)
  • Author
    Posts
  • #121686
    Profile photo of andia
    andia
    Participant

    in the scenes the led strip balance is stored and then recalled with the softkey. just be sure you block everything else that should not be recalled.

    #120242
    Profile photo of andia
    andia
    Participant

    if you are talking about „midi control 2.01“, works here on mac mini m2.

    #119955
    Profile photo of andia
    andia
    Participant

    the problem is about having subscriptions in both directions at the same time, not about listening back in realtime or something in that regard. I just want to be able to have a dante routing that does not require to be changed wether I want to record or playback audio.

    #119774
    Profile photo of andia
    andia
    Participant

    it seems to be a strange metering issue involving the insert slots. and of course only became apparent because of the limiter in my LR chain.

    if insertA of mainLR is deactivated, levels on metersMTX match levels on metersLR (MTX having dyn8 fully activated on insertA)

    if insertA of mainLR is activated and MTX having dyn8 fully activated on its insertA, levels on MTX meters still show pre insertA Metering levels of mainLR.

    if insertA of mainLR is activated and dyn8 of MTX has all bands of multibd4 deactivated, levels of meterMTX match levels of meterLR.

    I have sent all information to A&H support.

    #119686
    Profile photo of andia
    andia
    Participant

    yes, they are at 0. I am in contact with support and will post, when something comes up.

    #119647
    Profile photo of andia
    andia
    Participant

    and it is in th multi bd4 part. when all bands are deactivated the level is correct.

    #119252
    Profile photo of andia
    andia
    Participant

    Network bridge was off. Latest versions of dvs and dante controller, mbp 2018 running ventura 13.6.4 from the top of my head, the latest version of ventura.
    it is really strange. i also exchanged the 2 usb-c adapters to see if one of them would work when subscribing in both directions to and from the dlive dante card. Same results on both adapters. Latency peaks and lost packets.

    #119213
    Profile photo of andia
    andia
    Participant

    all devices are 96k. the rest is as you describe it.

    something else is very weird. I have 2 usb-c belkin network dongles connected, one for dvs and dante controller and the other for director so I have them on seperate networks. when I want to connect to the mixrack, the dantesystem goes crazy and loses DVS, latency reports go ultrahigh and so on. (dlive v1.98)

    this is an additional problem, besides the subscription of transmitters and receivers to dvs at the same time.

    maybe it is a ventura problem with dvs and director, i dont know.

    #118922
    Profile photo of andia
    andia
    Participant

    thanks, that is something to try.

    #118533
    Profile photo of andia
    andia
    Participant

    who is master (leader)? and how is leader configured?

    #117900
    Profile photo of andia
    andia
    Participant

    for that I use the “copy filter to” option in the scenes menu. that way I have to update my recall filter in only one scene after a change of mixer configuration and after that I copy that recall filter to a range of other scenes. works pretty fast.

    #116949
    Profile photo of andia
    andia
    Participant

    LR-assignment does not matter at all.

    FX-returns can of course,as everything else, be routed to whereever they may have to.

    #116854
    Profile photo of andia
    andia
    Participant
    #116200
    Profile photo of andia
    andia
    Participant

    only 16 gangs

Viewing 14 posts - 1 through 14 (of 14 total)