[ArtParticipant]

$199 in US

[ArtParticipant]

So if someone offered you a trade-in on your iLive towards the purchase of a DLive, would you buy it?

Art

[ArtParticipant]

Does it do it with a default (blank) scene?

[ArtParticipant]

+1

[ArtParticipant]

Guess I should have specified that the “10” in my earlier answer was in hexadecimal format. But then I guess it should have been 0x10 so I’m still not correct.

There are 10 types of people in this world. Those who understand binary and those who don’t.

[ArtParticipant]

Yes. Studio One uses 48Khz sample sizes. You should be able to simply drag those files into Studio One and it should work.

[ArtParticipant]

Hmm. Not sure how that did a double post. Sorry.

Must have been a tap delay.

[ArtParticipant]

You would probably want to use the Waves card with a Soundgrid server instead of the Dante card and then take a feed from Soundgrid into Protools.

Art

[ArtParticipant]

+1

[ArtParticipant]

Why not use the High Pass Filter in the PEQ for the mix?

[ArtParticipant]

Let me correct you. Until the last version, the M32/X32 editor was a fixed resolution. This is a new addition for them too after many years of complaints.

[ArtParticipant]

I frequently mix a QU-Pac with 2 iPads. I have no issues with “feel” or latency, but that is often dependent on the quality of the wi-fi signal.

I had to mix on an X32 that was on the side of the stage this past weekend. It had a horrible wi-fi. It was useless to try to use the iPad app when going to FOH just to take a quick listen.

Whenever I mix with iPads, I always make sure that I have some type of desk available. I always have this one here for when there is not one available from the venue.

I like Mark’s suggestion to try to use the QU-16 with the iPads, just to determine if it works for you.

[ArtParticipant]

You said that they are both on the same version of firmware. Were the scenes saved to the USB with those levels of firmware or were they old files?

I’d re-save them and then see if they are readable on the new system.

I had the exact same issue when I tried to install files on a 1.82 system from a 1.71 system. An upgrade and a re-save resolved that issue.

[ArtParticipant]

Are both consoles on the same level of firmware?

[ArtParticipant]

That would be great.

Thanks.

[Author]

Posts