Forum Replies Created
-
AuthorPosts
-
2023/07/18 at 1:27 am #113737
For our mates in this community… My Sandisk SSD 1TB works without any fail or error during live recording.
I have Qu-24 and tested during a live show 2 weeks ago and I’am mixing with a Cubase DAW for stream and CD project, now.
Highly recomendable.Attachments:
You must be logged in to view attached files.2021/03/08 at 10:45 pm #99666I connect through Qu-24 USB port
I don’t use interface
Bitwig record from channels 17/18 when I use my pen drive in the stereo channel 3 as well as I select mono channels 14 and 15 per example and its record music, my voice, etc.
But when I want listen my recording, only can use the MacBook speakers or headphone connected to the Mac.I just looking for listen my recordings through my speakers connected to my Qu-24
Do you want a pic with channels output options in the Bitwig configuration?
Maybe its useful to know what’s wrong!2021/03/08 at 9:32 pm #99662Hi volunteer,
Output is my Qu-24
My Speakers is connected to matrix 1-2 outputs in my Qu-24 but I don’t listen anything. I moved to my LR outputs, neither.
I select to MacBook speaker and works, but not through my Qu-24 and monitor speakers respectively.
indicators in the MacBook Pro shows signal in the output buss.
MacBook Pro is new and has BigRio iOS.Thanks for your time.
2020/11/02 at 2:39 pm #96072Hi folks,
Please read the article “About Pen Drive Issues” in my blog https://lixosd.wordpress.com/2020/07/23/about-pen-drive-issues/ where you will know about my experience with a curious 3.1 flash drive show in this message. Thanks for your support.
2020/07/23 at 5:59 pm #93590Hi folks,
Please read the article “About Pen Drive Issues” in my blog
https://lixosd.wordpress.com/2020/07/23/about-pen-drive-issues/
where you will know about my experience with a curious 3.1 flash drive show in this message. Thanks for your support2018/07/21 at 1:43 am #72855Your Samsung T5 Ssd work in live recording under high sound levels?
Because some mates says that floor noise interrupt the signal!!!2018/04/24 at 2:25 am #70571I appreciate a dynamic compressor in the Qu mixers.
Its useful to work with metal bands with many high level in volume and dynamics2018/01/07 at 10:28 pm #68003I´m impressed with your video and your work.
Congratulations!
Day after day I love my Qu.Thanks for your time sharing your experience.
Alberto Arias is my name and I live in Colombia, South America.
http://www.lixosd.com to know about my small heavy metal label.2018/01/06 at 9:55 pm #67977Amazing gear!!!
How do you di it?
Can you teach me, please?2017/06/10 at 2:10 am #63801Programming a soft key as a on/off switch could work in your desk
2017/01/22 at 3:41 pm #60806Yes, Is required for our Qu systems.
Also, I appreciate the new A&H effects used by dLive C Class series for the Qu-24, Qu-32, Qu-Pac and Qu-USB:
Peak Limiter 776, Dym8 for every channel.
Expanders are welcomed!!!2017/01/01 at 3:32 pm #60216Hi, guys
Happy new year!
I just proceeded following the format suggested by A&H.
My USB Stick is “Extreme” 3.0. Not Cruzer.
It really works fine.
Last november I used it with 3 metal bands and my USB was small to record 3 and half hours of music.
So, I recorded band by band.
When the first band was over, I download the recording to my iMac, then I formatted the USB in the Qu-24 and it was ready to the next band. Recording the second act, and downloaded to my iMac. Formatted the USB in the Qu-24 and record again.
I hope that help my explanation!
Any questions?2016/12/31 at 9:16 pm #60198I agree!
Sandisk Extreme, really works.
Here a sample in my last live recordingAttachments:
You must be logged in to view attached files.2016/11/23 at 2:10 am #59477Sandisk Extreme 3.0 is without a dude the best drive for recording.
Two weeks ago, I recorded 3 metal acts during a festival here in Medellin and it works!!2016/10/09 at 4:32 pm #58607Someone has experience with the New Mac to OS Sierra in the Qu mixers?
-
AuthorPosts