[WestpowerParticipant]

I think we might be talking at crossed purposes, we are already using an aux for the streaming.

What I am trying to achieve is a single fader that I can pull down to reduce the volume of multiple channels in an aux.

For the LR bus, this can easily be done using DCAs. Can you suggest any way of doing this on a (pre-fader) aux bus?

[WestpowerParticipant]

Thanks Søren, for clarity by independent I just meant volume wise – I am happy for channel processing to be shared, I just want the send into the group to be pre-LR-fader. Is that possible with a group or only an aux?

[WestpowerParticipant]

Just returning to this after focusing on our video stream for a while!

Routing out of the group is fine, but there still isn’t something quite right on routing into the group. The aux is a pre-fader stream out, so I want the group I am feeding into it to also be independent. But even with the group unassigned from the LR, the channel volume into the group is controlled by the respective channel faders in the LR mix.

The LR is for the room mix and so I want to have the channels in that mix controlled by a DCA, but then also have an independent mix (the group) of those same channels into a group that can be fed into the streaming aux. Or is this just not how groups work?

I guess other options are to double patch the inputs, or maybe it is possible to use another aux as the “group”, assign that aux to an input and feed that into the stream aux that way?

Thanks!

[WestpowerParticipant]

I would second that it would be very useful to be able to control talkback channel preamp gain with the soft rotaries – this is possible for all of the other local inputs so appears to be a simple update to add this ability.

[Author]

Posts