Forum Replies Created
-
AuthorPosts
-
2021/03/24 at 1:52 pm #100097
discovert, that Avantis also has build in “Ready relays”
So SQ and Avantis will have different Output stages…
@A&H: are the D/A Converters the same or are in the SQ-Series the cheaper ones?
Attachments:
You must be logged in to view attached files.2021/03/24 at 12:47 pm #100095with Block diagram!!!
great!2021/03/21 at 6:16 pm #100015A&H simply do not want to allow such routings.
Because for the normal SQ user it’s to high-level 😉
2021/03/21 at 6:01 pm #100014SQ SB +1
2021/03/21 at 5:55 pm #100013+1
2021/03/21 at 10:12 am #99997+1
but i can understand A&H – there must be a difference between dlive and SQ… sadly…
2021/03/18 at 12:14 am #99903You can use an aux and insert the FX in the aux-bus. But then you have to use a matrix as main out, because auxes couldn’t be send to LR.
gg2021/03/15 at 10:53 am #99836But with dedicated extra Layers the arrangement would be free.
for me the complet-reorder of channel strips with the DCA spill is on the SQ series (because here the workspace is onle ONE HOLE Faderbank) is annoying.
DCA spill is very very fine when there are 2 different Fadebanks!so the idea of having more than 6 Layers with the softkeys is more beautiful..
😉2021/03/15 at 10:44 am #99834Hi BarnabY,
with some extra work:
you can assign all channels of your group also to a DCA 😉the “select” Button of the group is used to activate the processing, while at the DCA the button is “free” an can do the spill.
@jeroenaudio
+1 Yes!
As you said the POP Groups of the PRO-Series are the Layer Buttons at A&H.
And extend the 6 Layers with the userkeys would be very very fine! especially at the SQ5!!
Love!2021/03/03 at 7:20 am #99473Hi,
But i think it’s still possible to write via MIDI to the LCD of the Midi-Strip.
Isn’t it?Have to test it…
greetings2021/03/03 at 7:13 am #99471Hi pedromigcruz,
I can’t understand why A&H will not allow the FX Send get send out of the console…
But as i write here, and you also discoverd – the returns CAN be routed…. =( *didn’t get the sense….*Here’s my post:
https://community.allen-heath.com/forums/topic/fx-send-local-outputOK it’s possible to record as example the FX Signal only WET.
But the restriction to loose the 4 Busses (if i’d like to use the FX-Slots for inserts) is very very BAD…Let’s see if A&H is willing to change here their architecture! – there’s still hope 😉
greetings!
2021/03/03 at 7:05 am #99469Hi Jarreck,
You can “Gang” only the Channel Mute of all this Channels.
So you can’t open one channel of this own -> you will open/close all channels.greetings
2021/02/28 at 7:33 pm #99383Hi, don’t think it would be the cable..
to change the speed of the fans – their supply is a PWM signal.
if the slower fan rotate all the time with constant rpm – it’s for secure NOT the cable connection…2021/02/27 at 11:25 am #99314Same idea here:
https://community.allen-heath.com/forums/topic/stereo-image-processing-for-groupsI’d love to see such editing possibillity on all Stereo Busses.
The question is, if the internal structure of the SQ can be changed to achive this options.Don’t think that this would need so much processing power – because it’s only an level change.
Hope that A&H could implement it!
greetings,
d2021/02/25 at 9:55 pm #99273+1
-> select function via midi!!
I use a midi faderwing as extension and want to select the channels on that board!would be nice:
-> selected channel processing
To have full hardware compressor control or something similar.
The touch&turn for every parameter is not the fastest solution…
I like deticated knobs for every function…Hope this dream will get someday true… 😉
Midi issues 99 😉 -
AuthorPosts