zoom sound to QU-24

Forums Forums Qu Forums Qu troubleshooting zoom sound to QU-24

Tagged: 

This topic contains 5 replies, has 2 voices, and was last updated by Profile photo of Mike C Mike C 6 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #105733
    Profile photo of Macdalor
    Macdalor
    Participant

    My issue is that no sound is coming from ZOOM to my A&H QU24 even though all other computer sound is working fine. I get sound from other outputs like the built-in speakers or my monitor’s speaker but obviously not ideal when video sharing audio projects.
    I am in the zoom audio preferences to set this up as default given that I encountered problems during my last zoom conf…
    when I press the “test speaker” button no sound is coming through.

    Any advices at all?

    Attachments:
    You must be logged in to view attached files.
    #105739
    Profile photo of Mike C
    Mike C
    Participant

    Did you go to the IO set up menu in the preamp section on the QU and select USB on the proper inputs.

    #105741
    Profile photo of Macdalor
    Macdalor
    Participant

    Thank you for your reply Mike. I did. As I mentionned I get sound out from other sources (Logic, Itune, Youtube etc)

    #105744
    Profile photo of Mike C
    Mike C
    Participant

    If your using the USB B connection on the back of the mixer I think
    it’s a matter of finding out what tracks/channels your outputting on ZOOM
    and then set the board inputs as needed.

    #105786
    Profile photo of Macdalor
    Macdalor
    Participant

    Thank you Mike! Kowing ZOOM’s output is defaulted to 1&2 helps obviously…I am using soundflowerded to enable me sending through to my usual 29/30(ST3) computer output.

    #105813
    Profile photo of Mike C
    Mike C
    Participant

    You should be able to bring it in on channels 1 & 2 then.

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.