ZED428 how to solo track

Forums Forums Other A&H products ZED428 how to solo track

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of Jamesthegold Jamesthegold 1 month ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #118811
    Profile photo of Jamesthegold
    Jamesthegold
    Participant

    Hi, i am new to the forum although I registered a few years ago and I use my 428 just in my small home studio
    is it posible to use the PFL channel button to solo just that channel on the L and R output channels
    Yes I can mute all the other channels but its……….!
    If its not normally possible is there a workaround?
    Any help would be great
    Regards

    #118831
    Profile photo of Mike C
    Mike C
    Participant

    You could make up an adapter TRS breakout cable to use the headphone jack to feed your studio monitors. Pressing any PFL button would then just send the PFL’d channel to the monitors.

    #118836
    Profile photo of Jamesthegold
    Jamesthegold
    Participant

    Hi Mike,
    Thanks for the reply!
    Your suggestion sounds like a good idea and I will try it
    However does the headphone output change/ or colour the sound as i assume that it has its own small amplifier to powere the head phones?

    Would it be possible to modify the mixer so that you have a small switch to go from normal use (output to L and R) or that the output is from the headphone socket

    If anybody has any other ideas?……….
    Regards James

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.