hi guys,
I’m completely newbie zed mixer user, and just found the “PFL” pre-fader-listening output level is much louder than nominal output(say 20+ db), i’m not sure if it is normal.
to my acknowledgement, there shouldn’t be such great difference when switching PFL button, especially when 20db boost might damage PA immediately.
please let me know if there is any recommendaions.
thank you.
conditions:
1.either mic or line input, a test signal @ -40db is given,
2.gain knob set at exactly 1 o’clock,
3.both channel fader and main faders are set to 0,
4.there’s no other tweaks.
.
.
