Xone:96 – Input on USB 1 and 2 only plays on channel 1

Forums Forums Other A&H products Xone:96 – Input on USB 1 and 2 only plays on channel 1

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of thorminator thorminator 3 months, 4 weeks ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #117557
    Profile photo of thorminator
    thorminator
    Participant

    Hi all,

    I am struggling to make two USB inputs work on my Xone:96. When playing from laptop or tablet into USB 1 or 2, the only output I can get to work is channel 1, irrespective which or how many sources are connected to which USB input. I have tried dialling through all USB combinations on the channel input select switches. Is there anything obvious that I am missing? I’m a newbie and probably just overlooking some settings but cannot figure out which ones.

    I seem to be having the same issue as asked here (unresolved):
    https://forum.djtechtools.com/showthread.php?t=96738

    Any pointers welcome.

    Many thanks

    thorminator

    #117561
    Profile photo of KeithJ A&H
    KeithJ A&H
    Moderator

    @thorminator

    Sorry you’re having some difficulty with your 96.
    Please contact us directly through support.allen-heath.com and you’ll be put in touch with one of the XONE specialists who will be able to help.
    They’ll also need some more info on what you’ve tried connecting, whether you’ve installed drivers where required (Windows), what software is being used etc…

    Thanks,
    Keith.

    #117609
    Profile photo of thorminator
    thorminator
    Participant

    Thank you for the prompt reply, Keith. I have submitted a request through support.allen-heath.com.

    Best,

    thorminator

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.