Xone 23C Channel fader issue

Forums Forums Other A&H products Xone 23C Channel fader issue

This topic contains 0 replies, has 1 voice, and was last updated by Profile photo of Pete Pete 2 years, 5 months ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #104018
    Profile photo of Pete
    Pete
    Participant

    Hi People

    I have a Xone 23c and since rigging it to DVS compatible by taking it apart and plugging in the little red wires, my right channel fader is unresponsive and stuck on max output. Cross fader and left channel are fine normal but when i pull the right fader fully down it’s still giving full audio. This is with DVS and phono vinyl so it is a hardware issue. I can only use cross fader because of this and keep both channels on full, which i hate. Anyone else experienced this or know of a fix?

    Thanks

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.