white noise

Forums › Forums › Qu Forums › Qu troubleshooting › white noise

Tagged: 

This topic contains 5 replies, has 5 voices, and was last updated by Profile photo of aloapp aloapp 4 years, 4 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • 2017/11/09 at 4:55 pm #66214
    Profile photo of redblanket
    redblanket
    Participant

    I have the qu-16. “White Noise/Hiss” is coming from the board and I can’t get rid of it. (its not a humming sound) It remains even after I have removed all inputs and changed out amps, cables, speakers, power source, power cables… everything! The only place it can be coming from is the board itself. You will even see the level meter flutter due to it. I am going to run a firmware update today and see what that does.

    Any Suggestions?

    2017/11/09 at 7:39 pm #66215
    Profile photo of Giga
    Giga
    Participant

    Mains ? Mixes ?

    Clean power ?

    Unassign everything from everywhere and start adding sources one by one

    Good luck !

    Giga

    2017/11/09 at 7:41 pm #66216
    Profile photo of Giga
    Giga
    Participant

    Or is it the actual signal generator at work ?

    Giga

    2017/11/09 at 11:03 pm #66220
    Profile photo of Dick Rees
    Dick Rees
    Participant

    Check it out:

    Attachments:
    You must be logged in to view attached files.
    2017/11/10 at 10:15 am #66229
    Profile photo of MarkPAman
    MarkPAman
    Participant

    It may be worth trying the “Reset Mix Settings” in the scenes section before doing anything else.

    2019/12/04 at 12:10 pm #88054
    Profile photo of aloapp
    aloapp
    Participant

    Thank you. This is very useful.
    ساخت اپ ios

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.