Weird GLD problem.

Forums › Forums › GLD Forums › GLD troubleshooting › Weird GLD problem.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2015/09/28 at 8:56 pm #50910
    Profile photo of GCumbeeGCumbee
    Participant

    Ok. I have stumped myself and I can usually figure these things out given enough time.

    Was building a show on GLD editor. First in long time. First in 1.51. First in Win 10. Got it built. Loaded it into console. Everything seemed fine except no Main output. PAFL on Main worked but no output. Not with input or tone. Oddly with this config from the editor. Mix is labeled MAIN but says 1. Not LR. Meter shows signal present but nothing on meters or phones. I load an old show back in and it works fine. Load new show and nothing. No DCAs are turned on. No reason for this not to work.

    Any ideas?

    2015/09/28 at 9:14 pm #50911
    Profile photo of GCumbeeGCumbee
    Participant

    Ok. Finally found it. For some reason the editor had defaulted the Mains to PAFL on the PAFL page to inf. Didn’t think that would create that problem. But it did.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.