WARNING – Concerning Lock Surface

Forums › Forums › Qu Forums › Qu troubleshooting › WARNING – Concerning Lock Surface

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Nicola A&H Nicola A&H 10 years, 2 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2014/02/05 at 11:00 pm #37628
    Profile photo of Lightwalker87
    Lightwalker87
    Participant

    Hi Guys,
    during getting to know my brand new QU16 running Firmware 1.2, I figured out there is a bug in the Lock Surface function.

    If you press any soft button configured as mute group while the surface is locked, nothing happens as expected.
    Now if you unlock, everything is fine still…until you push any PAFL or Select button, then the before pressed Mute Groups is suddenly active and in worst case you will have zero output.

    I hope the A&H Team will fix this, better already in 1.3.

    2014/02/17 at 11:29 am #37765
    Profile photo of Nicola A&H
    Nicola A&H
    Keymaster

    Confirm fixed in V1.31.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.