Virtual sound check with Dual Rack and Dante

Forums › Forums › iLive Forums › iLive general discussions › Virtual sound check with Dual Rack and Dante

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of ddff_lv ddff_lv 8 years, 11 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2015/05/02 at 5:04 am #47696
    Profile photo of pfr
    pfr
    Participant

    Hi, I have a setup with dual rack (idr64 and idr16) and Dante installed in a church. We use Dante primary to feed the ME-U For the IEM. And recording the sermon. We have also discussed the possibility to do virtual sound check. Which is fairly simple in a standard setup, but how do I route the signals from the Dante to the correct channel back to the Ilive. 10 inputs are coming from the idr16 (drum), all others are from the master idr64.

    Cheers paul

    Sent from my iPad using Tapatalk HD

    2015/05/02 at 2:07 pm #47697
    Profile photo of ddff_lv
    ddff_lv
    Participant

    Not really complicated- first you route the dante channels to ACE channels into slave rack, then chose ACE channels as source for inputs into master rack.

    ddff

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.