Using two qu32 with stage boxes?

Forums Forums Qu Forums Qu general discussions Using two qu32 with stage boxes?

Tagged: , ,

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of xyz xyz 5 years, 2 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #53769
    Profile photo of Antigua Productions
    Antigua Productions
    Participant

    Hello,

    Is it possible to use two qu32 mixers with the stage boxes? I want to have one in FOH and one in MON. I thought that perhaps I can use the “monitor” rj45 on the last stage box on the daisy chain. I can’t find any info on it so I don’t think it’s possible.

    Please advise.

    Thanks,

    FC

    #53770
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    Nope – the QU is a clock master, it cannot be a clock slave.
    The monitor position could use a couple of iPads, or QuYou conections though.

    #53773
    Profile photo of Antigua Productions
    Antigua Productions
    Participant

    Fair enough. Thanks Bob!

    #53786
    Profile photo of xyz
    xyz
    Participant

    OR a rack or analogue spliters ‘at source’ of which works perfectly!
    Simplicity and no complications!

    In my opinion its best the Monitor QU has direct access to control off/on phantom to Di boxes / condensers etc…
    That is, in multiple act scenarios. 🙂

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.