Using Qu pac with SQ7

Forums Forums SQ Forums SQ general discussions Using Qu pac with SQ7

This topic contains 5 replies, has 3 voices, and was last updated by Profile photo of Matthew D Matthew D 3 years, 9 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #92648
    Profile photo of Matthew D
    Matthew D
    Participant

    Hello! Does anyone know if the Qu Pac 24 is compatible to be used as an expander with the SQ series?

    #92651
    Profile photo of SteffenR
    SteffenR
    Participant

    there is no Qu Pac 24…

    you can use a QU with a SQ together
    but it’s not exactly the same as an expander

    #92666
    Profile photo of MarkPAman
    MarkPAman
    Participant

    I’ve done this. It took me a while to get my head around the correct routing, but it’s all saved in the library now for next time, if there is one.

    Remember to set the QuPac as the master clock, and that you’ll need to control Gain & Phantom from the QuPac (but a tablet makes this pretty easy).

    #92669
    Profile photo of Matthew D
    Matthew D
    Participant

    @markpaman I have a few questions if you’re willing to answer:

    1) Can you give me an idea of what the routing should look like?
    2) How do I set the master clock?
    3) Does the gain control/phantom power have to be controlled by the QuPac for all of the channels (including SQ) or just for the channels in use on the QuPac?

    #92682
    Profile photo of MarkPAman
    MarkPAman
    Participant

    Kieth explains 1) & 2) well here:

    3) Each desk controls its own preamps.

    If you want, I can look at my saved patching and screenshot it, but probably not until the weekend.

    #92695
    Profile photo of Matthew D
    Matthew D
    Participant

    Excellent! Thank you! I didn’t know this video was out there!

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.