Using Qu-Pac as an audio interface

Forums Forums Qu Forums Qu general discussions Using Qu-Pac as an audio interface

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Mike C Mike C 3 years, 8 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #93393
    Profile photo of Matthew D
    Matthew D
    Participant

    Hello everyone. I am trying to use the Qu-Pac as an audio interface and I’m having trouble getting the routing done correctly in order to use the headphone jack on the front of the pac as my monitor source. Does anyone have any insight on this?

    I am using Pro Tools 12 with Windows 10. I believe all the drivers and firmware are up to date.

    #93394
    Profile photo of Mike C
    Mike C
    Participant

    What are you wanting to monitor on the phones?

    When selecting PAFL on any channel or mix will bring that source to the
    headphone jack. With no PAFL selected you will have the main LR at the headphone
    jack.

    You can select in the set up menu to either have the PAFL additive to select multiple
    sources and listen to them all that same or in single solo mode.

    You can also select the pick off to be pre fade or post fade.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.