USB PreFader

Forums › Forums › SQ Forums › SQ general discussions › USB PreFader

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • 2020/05/23 at 10:19 pm #92075
    Profile photo of KGInklingKGInkling
    Participant

    Hello is it possible for usb to not be affected by the fader

    2020/05/24 at 12:20 am #92076
    Profile photo of Mike CMike C
    Participant

    The short answer is yes for either USB jack.

    What USB jack are you using and by fader do you mean channel fader
    or main mix master fader.

    2020/05/24 at 12:59 pm #92081
    Profile photo of KGInklingKGInkling
    Participant

    Sorry I wasn’t as clear what I meant is in multitrack recordings I will be using USB B mode but when I lower a channel fader on the mixer it affects my recording for that specific channel.

    2020/05/24 at 7:43 pm #92087
    Profile photo of ShowtimeShowtime
    Participant

    If you are using input direct then you have to set the direct out to pre fader.

    You can also tyline the input’s to the usb.

    2020/05/24 at 9:36 pm #92088
    Profile photo of KGInklingKGInkling
    Participant

    Could you give me a link or video as to how to do it

    2020/05/24 at 9:43 pm #92089
    Profile photo of Mike CMike C
    Participant

    Not sure of a video link but the direct out setting is in the channel preamp
    set up menu. Tie line patching is in the IO set up menu.

    2020/05/24 at 11:06 pm #92091
    Profile photo of Andre SAndre S
    Participant

    Hey KGInkling,

    A video just for you! I hope it is correct! 😉

    Cheers

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.